An essential safety tool. Locks onto gas struts during vehicle service, to enable the struts to be fixed in an extended position. Universal application for all gas struts on boots, bonnets, hatch backs etc, as the clamp simply locks onto the strut's shaft.

• Aluminium body and brass tip to prevent damage to the lift support
• Magnet to hold the tool in place while securing the clamp
• For up to 13mm struts

Versatile kit with dies for crimping battery cables, balustrading wire, and swaging.

8T hydraulic crimping force for ease of use.

• Die Sizes: 6, 10, 16, 25, 35, 50 & 70mm² Swaging Die
• Overall length: 320mm

Made from TPR material, this organiser rack holds 15 wrenches. TPR is a softer plastic allowing wrenches to be held more securely, but still easily removeable.

This organiser rack is reverse facing. So when placed next to a standard forward facing organiser rack, the wrenches sizes still face towards you, while at the same time taking up less space in your toolbox.

A space saving design!

• Reverse facing
• Holds 15 wrenches
• Made from TPR material
• For use in toolbox or wall mounted

A set of support hooks which are ideal for holding the brake caliper, during brake service, to avoid damaging the brake pipes. Also a great solution for hanging other test equipment, such as replenishment bottles.

• Protective coating to avoid damage.
• Solid steel construction | Non flexible
• 2 piece set

A specialised engine stabiliser bar for BMW vehicles.

The bar extends 1400mm, with two removeable supporting stands which can be set up on the threaded hole bases of the shock absorber upper base for more stable engine support. Universal joints on both supporting stands allow for the adjustment of the support bar in any direction.

An adjustable 720mm bar offers additional support to prevent the engine toppling over. And a secondary pair of stands is provided which can be set on the threaded holes of the linking bars in the engine bay.

• One forging hook and chain
• One hanging ring and locking ring which can be screwed directly onto the engine.

A handy tool for single handedly depressing the brake / accelerator pedal, as well as holding the steering wheel firmly in place during wheel alignment testing.

• Trigger controlled mechanism, with thumb lock release.
• Supplied in blow mold case
• 450mm overall length

Heavy duty bar which provides support during engine repairs. Heavy duty rubber supports avoid damage to paintwork, while providing anti-slip stability.

• 500kg capacity
• Range: 520 - 1500mm

This engine stabiliser bar is made from robust 50mm square tube, and extends to 1,830mm. Rubber pads on the main bar protect against paint damage. A second bar provides support to prevent the engine from toppling over. This bar extends to 845mm.

• This support brace can be used with / without the third leg.

Specialised engine stabiliser bar for supporting the engine during gearbox removal on VW Transporter (04-) and T5. The bar extends from 578mm to 1830mm.

• Also suitable for use on other makes / models given adjustable supporting seats, two hooks / chains, and extended base.
• OEM Equiv: 10-222A/23

An essential safety tool. Locks onto gas struts during vehicle service, to enable the struts to be fixed in an extended position. Universal application for all gas struts on boots, bonnets, hatch backs etc, as the clamp simply locks onto the strut's shaft.

• Aluminium body and brass tip to prevent damage to the lift support
• Magnet to hold the tool in place while securing the clamp
• For up to 13mm struts