Steering Knuckle Spreader

Universal
SKU: ET7110

Automotive


A specialised kit for spreading the steering knuckle to enable the removal / installation of shock absorbers without the risk of damaging the aluminium or cast iron knuckle.

The tool is adjustable and suitable for steering knuckles with either a clamping style strut or ball joint mount.

Universal application.

SKU ET7110
Barcode # 9321280325555
Brand Automotive
Shipping weight 0.7700kg
Vehicle Make Universal

12 Months


More from this category


BMW CV Output Shaft Kit

BMW CV Output Shaft Kit

A specialised kit for removing / installing seized output CV shafts in wheel hubs. This kit suits manhy BMW vehicles, but not the E53 X5. For this vehicle, refer ET1253D.

  • Applications: E30 | E31 | E32 | E36 | E39 | E46 | E52 | E53 | E60 | E63 | E64 | E65 | E66 | E67 | E83 | E85 | RR1

BMW Lower Control Arm Caster Bush Extractor

BMW Lower Control Arm Caster Bush Extractor

A time saving tool for removal and reinstallation of the caster arm (thrust arm) bushing mounts on BMW 3 Series vehicles.

  • Models: E30 | E36 | E46

Hydraulic Steering System Press Kit

Hydraulic Steering System Press Kit

For removing and installing bushes and bearings. The hydraulic cylinder helps save time and energy compared to manual methods.

Universal application.

  • Includes M20 x P2.5 spindle
  • Sleeve sizes: 18-60mm ID / 26-68mm OD, with 2mm increments

Mercedes Lower Control Arm Bush Remover

Mercedes Lower Control Arm Bush Remover

A time saving tool which allows bush replacement to be done on vehicle without having to remove the lower control arm This kit removes / installs the front lower control arm bushes on the W170 | W202 models.

Bush replacement can be done on car without having to remove the lower control arm, allowing the job to be performed in about an hour.

Steering Rack Removal Tool

Steering Rack Removal Tool

Services inner tie rods that use flats - not hex inner nut

  • Applications: 30 - 48mm
  • Length: 406mm

Steering Knuckle Spreader

Steering Knuckle Spreader

A specialised kit for spreading the steering knuckle to enable the removal / installation of shock absorbers without the risk of damaging the aluminium or cast iron knuckle.

The tool is adjustable and suitable for steering knuckles with either a centralised slot or a non centralised slot.

Specially design for twin ball joints as fitted to Audi | VW control arms.