Timing Tools Finder
OEM Search
Engine Code Search
Vehicle Make
Brand
- Automotive (10)


Crowsfoot Oil Filter Wrench | 27mm | 12 Pt
Oil filter housing removal wrench for difficult to access oil filter covers on Ford Duratorq 2.0L & 2.2L TDCI engines (including Ford Mondeo). Crowsfoot design.
This wrench is designed to easily wrap around the inlet manifold allows for quick removal of the oil filter cap.
- 27mm | 12 Point
- OEM Equiv: 303-1579
- Applications: 2.0L | 2.2L Duratorq (DW10C / DW12C)


Ford | JLR 2.0L | 2.2L TDCi Timing Kit
This modest little set is designed for the 2.0L / 2.2L DOHC common rail diesel engines in Ford, Land Rover, Peugeot & Volvo vehicles.
It allows the camshaft pulley to be locked using the timing pin while securing the flywheel / ring gear with the locking pin & plate. The cam belt transmits drive from crankshaft to camshaft then from one camshaft to the other by chain located in the cylinder head.
- OEM Equiv: 303-393 | 303-393-01 | 303-1059 | 303-1277


JLR | PSA Timing Kit
This kit is designed for timing belt replacement on 2.7L | 3.0L V6 diesel engines on Land Rover (TDV6), Jaguar, and Citroen engines.
- Engine codes: JLR 276DT | 306DT | AJV6D, Citroen DT20C

JLR 3.0L | 5.0L Crankshaft Holding Kit
This kit comprises a specialised tool to hold the crankshaft pulley while installing / removing the crankshaft bolt on late model (2010 onwards) 3.0L | 5.0L engines, plus a deep socket for the crankshaft front pulley bolt.
- Engine codes: AJ126 | 306PS | 508PN | 508PS

JLR Crankshaft Pulley Kit
A set of tools for the removal of the front crankshaft pulley (crankshaft vibration damper) fitted to the Jaguar | Land Rover 3.0L V6 and 5.0L V8 petrol engines. These crankshaft pulleys are tightened to 200 Nm so are very tight to undo and must be held by the holding tool in this kit. Also included in this kit are the components required to remove the pulley safely.
- Engine codes: AJ126 | 306PS | 508PN | 508PS
- OEM Equiv: 303-1437 | 303-1438 | 303-1439 | 303-1439 | 303-1440 | 303-1441


JLR Crankshaft Pulley Socket
A specialised deep socket for the crankshaft front pulley bolt on late model (2010 onwards) 3.0L V6 | 5.0L V8 engines. Use in conjunction with the ET1017L.
- Applications: Jaguar XK (10-15) | XJ (00-16) | XF (10-16) | XE (16) | F Type (14-16), Land Rover LR4 (10-16) | Range Rover (10-16) | Range Rover Sport (10-16)
- OEM Equiv: 303-1438 (3031438)
- 3/4" Sq Drv

JLR Petrol Injector Remover
A special injector removal tool for petrol injectors on JLR 5.0L V8 engines. The angled shaft provides better access when working especially on the rear injectors.
- Applications: XK | XF | XJ (with 5.0L V8 engines)
- OEM Equiv: 310-197

JLR Timing Kit | 3.0L V6 / 5.0L V8
A comprehensive kit for locking camshaft / crankshaft on 5.0L V8 petrol engines (10-).
This kit includes timing tools for locking the camshaft / crankshaft and also special tensioning wrench / camshaft turning tools.
- Engine codes: 306PS / AJ126, 508PN | 508PS

Oil Filter Wrench 90mm | 15F | JLR
A cup style oil filter wrench suited to post 2010 Land Rover vehicles. Part of the Endeavour Tools range of specialty oil filter wrenches.
- 90.2mm dia x 15F
- Engine: 5.0L V8 Petrol engine (2010>)
- Applications: Jaguar XK, XF, XJ, XKR, XFR, XJR, F Type | Land Rover Discovery 4, Range Rover, Range Rover Sport

Ratcheting 27mm Crowsfoot Oil Filter Wrench
Oil filter housing removal wrench for difficult to access oil filter covers on Ford Duratorq 2.0L & 2.2L TDCI engines (including Ford Mondeo). Ratcheting crowsfoot design for even faster action.
This wrench is designed to easily wrap around the inlet manifold allows for quick removal of the oil filter cap.
- 27mm | 12 Point
- OEM Equiv: 303-1579
- Applications: 2.0L | 2.2L Duratorq (DW10C / DW12C)