Hub Puller & Drive Shaft Remover

Press Kit
SKU: ET6648

Automotive


A versatile kit for removing hub pullers. The kit provides for two removal methods - either using a force screw, or for stubborn hubs, a slide hammer.

  • Applications: 3 | 4 | 5 | 6 metric stub hubs
  • Sizes: M12 x 1.5 | M14 x 1.5
  • Size range: PCD 90-130mm
  • Includes a 4.3kg slide hammer, and threaded spindle for pushing out half shafts

SKU ET6648
Barcode # 9321280403079
Brand Automotive

12 Months


Others also bought


Holden Injector Rail Tool

Holden Injector Rail Tool

Unseat injectors evenly on Hitachi SIDI system (2010 LF1 3.6L and LAF 2.0L ECOTEC engines).

  • OEM Code: EN-49248

GEN2 Wheel Bearing Removal Kit

GEN2 Wheel Bearing Removal Kit

A specialised kit for servicing Gen II wheel hubs / bearings on Ford vehicles with 82mm diameter front wheel bearings. These tools ensure that the insertion loads are taken only on the outer race of the bearing. Gen II wheel bearings are a wheel bearing / drive flange that cannot be separated.

Always adequately lubricate threaded force screws and thrust bearings.

  • 82mm diameter


More from this category


Adjustable Wheel Bearing Lock Nut Wrench

Adjustable Wheel Bearing Lock Nut Wrench

Adjustable jaws fit all hexagon & octagon wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.

  • 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
  • 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
  • Pin diameters: 1/4" | 5/16" | 3/8"

Drive Shaft Wheel Bearing Supports Drive Shaft Wheel Bearing Supports

Drive Shaft Wheel Bearing Supports

Universal dummy drive shaft wheel bearing supports are easy to install, and allow most light vehicles to be placed back on their wheels, and moved without their drive shafts. For instance, when the gearbox / engine are removed, and the vehicle needs to be moved.

To install simply insert in place of the drive shaft through the wheel drive flange. Holds the bearing and flange together to prevent damage.

Do not tow vehicle on public roads using these supports. Beware modern ABS sensors.

Ford Front Wheel Bearing Removal Kit

Ford Front Wheel Bearing Removal Kit

Essential time saving service kit for working on Transit (>06) wheel bearings and brakes on the front axle. Permits correct dismantling of the wheel bearing, with hub and brake disc.

  • Removal of wheel bearing housing with hub
  • Changing of brake disc
  • Changing of wheel bearings
  • Removal of the bearing inner race from hub
Promo
Ford Lock Nut Socket Ford Lock Nut Socket

Ford Lock Nut Socket

Special socket for adjusting castellated axle lock nuts on Transit vehicles (80 | 100 | 115 | 120) with RWD type 34 axles.

  • 63mm OD | 53mm ID
  • 4 Pin design
  • 1/2" Sq Drv

Front Wheel Bearing Socket

Front Wheel Bearing Socket

Professional quality four pin front wheel bearing socket for Toyota Hiace (06-) vehicles. The pins in this socket are solid / high quality for extra durability. Be careful to avoid sockets with cheaper split pins that will more easily fail under stress.

  • 1/2" Sq Drv
  • 4 pin design

GEN2 Wheel Bearing Kit

GEN2 Wheel Bearing Kit

GEN2 wheel bearings have a wheel bearing / drive flange that cannot be separated. This kit ensures loads are only taken on the outer bearing race.

  • For 62mm | 66mm | 72mm | 85m bearings
  • Applications: Audi A2 | VW Lupo, Polo, Multivan, Touareg, Transporter