CanDo OBD Aid
SKU: ET2616
The new CanDo OBD Aid allows you to safely check the OBDII DLC port to diagnose exactly what is causing communication errors. It is a fast and easy way to properly check your DLC port prior to scan tool communication or ECU flashing.
Features and Benefits:
- Conduct a safety check on OBDII DLC port prior to connecting your scan tool or flashing ECU
- Constantly monitor the battery voltage with warning beeps in the event of weak battery condition
- Warning beep will alert you when the voltage falls below 12V or when it rises above 15.2V while programming or coding
- Provides a quick check on the alternator charging condition
- Making voltage/frequency measurement at the pins during diagnosis communication with ECU when the engine will not start
- Detection of protocol and data communication during diagnosis and re-flash on the ECU.
- Colored LED lights display when a protocol is detected, grounds and voltage.
Specifications:
- Operating Range: 7.0 ~ 24.0VDC Input
- Maximum Load: Up to 5.0 amps. Output
- Overload Protection: Yes, PTC Fuse
- Monitoring Voltages: Yes, below 12V, higher than 15.2V
- Protocols Detected: PWM(J1850), VPW(J1850), ISO 9141-2, DIS/ISO 14230-4, CANBUS (J-2284)
- OBDII Connector: 88mm length
| SKU | ET2616 |
| Barcode # | 9321280404502 |
| Brand | CanDo |
| Product weight | 0.7000kg |
| Shipping weight | 0.710000kg |
12 Months
Others also bought
CanDo Truck Code Reader
With a Los Angeles, California heritage, CanDo focuses on developing industry leading truck scan tools and code readers. Backed by a world class engineering team, and local Australian technical support, CanDo offers leading coverage of Australian, Asian, European and US trucks, agricultural and construction vehicles. Class leading with extensive heavy / medium / light duty truck coverage, plus OBDII.
PLUS CAT Power Equipment, CAT Construction, CAT Industrial
BIDIRECTIONAL - the only truck code reader with DPF Reset / Regeneration. Don't get stuck in limp mode!
- Access Engine, Transmission & Brakes
- Read/Clear Codes
- Special tests include: I/M Readiness, MIL Status, O2 Sensor Test, On-Board Monitor Test, EVAP System
- DPF Reset & Regeneration for Fuso, Cummins, Detroit, International and Isuzu
- View / Graph Live Data
- Coverage for J1939 / J1587 / J1708 and OBDII Protocols
- 6 | 9 | 16 pin and CAT connectors supplied
- Supports 500K baud rate
- Lifetime free updates
- Full colour
Power Probe Current Measuring Adaptor
Measures up to 20A (and as low as 1 milliamp). Displays current in realtime. Adaptors work with all Power Probe circuit testers!
More from this category
Battery Clamp Cable
Replacement battery cable clamp for the ET2709 code reader / battery tester.
CAN Breakout Box 12V / 24V
An advanced CANbus circuit tester compatible with both 12V and 24V systems.
Provides a live display of present communicating signals, and can display the voltage of each pin without having to use a multimeter.
Essential for checking ground / voltage on all OBDII pins prior to connecting a scan tool / flashing ECU. If your scan tool cannot communicate, it could simply be a fault with the OBD connector.
- Connect inline with scan tools, Or use with a multimeter / oscilloscope.
- Quickly diagnose CAN faults.
- Monitor battery voltage at the OBD port.
- A great way to log pin voltage data when used with our ET2504 multimeter.
