CanDo OBD Aid

SKU: ET2616

The new CanDo OBD Aid allows you to safely check the OBDII DLC port to diagnose exactly what is causing communication errors. It is a fast and easy way to properly check your DLC port prior to scan tool communication or ECU flashing.

Features and Benefits:

  • Conduct a safety check on OBDII DLC port prior to connecting your scan tool or flashing ECU
  • Constantly monitor the battery voltage with warning beeps in the event of weak battery condition
  • Warning beep will alert you when the voltage falls below 12V or when it rises above 15.2V while programming or coding
  • Provides a quick check on the alternator charging condition
  • Making voltage/frequency measurement at the pins during diagnosis communication with ECU when the engine will not start
  • Detection of protocol and data communication during diagnosis and re-flash on the ECU.
  • Colored LED lights display when a protocol is detected, grounds and voltage.

Specifications:

  • Operating Range: 7.0 ~ 24.0VDC Input
  • Maximum Load: Up to 5.0 amps. Output
  • Overload Protection: Yes, PTC Fuse
  • Monitoring Voltages: Yes, below 12V, higher than 15.2V
  • Protocols Detected: PWM(J1850), VPW(J1850), ISO 9141-2, DIS/ISO 14230-4, CANBUS (J-2284)
  • OBDII Connector: 88mm length

SKU ET2616
Barcode # 9321280404502
Brand CanDo
Product weight 0.7000kg
Shipping weight 0.710000kg

12 Months


Others also bought


Promo
CAN Breakout Box 12V / 24V CAN Breakout Box 12V / 24V

CAN Breakout Box 12V / 24V

An advanced CANbus circuit tester compatible with both 12V and 24V systems.

Provides a live display of present communicating signals, and can display the voltage of each pin without having to use a multimeter.

Essential for checking ground / voltage on all OBDII pins prior to connecting a scan tool / flashing ECU. If your scan tool cannot communicate, it could simply be a fault with the OBD connector.

  • Connect inline with scan tools, Or use with a multimeter / oscilloscope.
  • Quickly diagnose CAN faults.
  • Monitor battery voltage at the OBD port.
  • A great way to log pin voltage data when used with our ET2504 multimeter.


More from this category


Battery Clamp Cable

Battery Clamp Cable

SKU: ET2709-BC

Battery Clamp Cable

Replacement battery cable clamp for the ET2709 code reader / battery tester.

Promo
CAN Breakout Box 12V / 24V CAN Breakout Box 12V / 24V

CAN Breakout Box 12V / 24V

An advanced CANbus circuit tester compatible with both 12V and 24V systems.

Provides a live display of present communicating signals, and can display the voltage of each pin without having to use a multimeter.

Essential for checking ground / voltage on all OBDII pins prior to connecting a scan tool / flashing ECU. If your scan tool cannot communicate, it could simply be a fault with the OBD connector.

  • Connect inline with scan tools, Or use with a multimeter / oscilloscope.
  • Quickly diagnose CAN faults.
  • Monitor battery voltage at the OBD port.
  • A great way to log pin voltage data when used with our ET2504 multimeter.