Truck Tools

A specialised set of 4 pin lock nut sockets for driving lug lock nuts with external teeth. The kit contains sockets from 20mm - 72mm diameter.

Please refer to the kit components for details of individual sockets.

• 1/2" Sq Drv
• 60mm overall length

Adjustable jaws fit all hexagon (49 - 135mm) & octagon (49 - 143mm) wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.

• 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
• 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
• Pin diameters: 1/4" | 5/16" | 3/8"

A specialised ball joint remover for European trucks. Designed for on vehicle maintenance, and to avoid damage to ball joints and related parts.

Easy to use / save time & money.

• 39mm dia
• Nut width 26mm / Bolt length 128mm
• Applications: > 4 Tonne trucks, including most European trucks
• Special application for MAN 414 drag link.

A specialised socket for manually turning engines on selected CAT / Mack vehicles. This socket makes it easier to adjust valve lashes, injectors etc. Use with a breaker bar. Quality one piece construction.

• Applications:Caterpillar CAT 3200 | 3406 Series C13 / C15 / C16 / 3208 / 3400 / 3406e / 3508 / 3512 / 3500 EUI/MUI & Mack E-7 | E-7 ETEC

Universal alignment kit for single and two disc dry clutches. Four centering sleeves aid close alignment. Supplied with two mandrels.

• Mandrels suit interior clutch hub 36-45mm and 42-52mm ID
• Spigot adaptors: 20, 25, 27, 30mm dia

A specialised tool for safely installing the crankshaft rear oil seal on Nissan UD trucks.

• Application: Nissan UD CK450 trucks over 20 tons
• Oil seal genuine: BZ5967E

This rear engine seal tool installer allows for the safe installation on Hino 15 / 17 ton trucks.

• Hino 10.5 / 15 / 17 ton trucks
• Engine codes: S05C-TB | S05CT | S05D | XZU412 | XZU414 | XZU420 | XZU424 | XZU430 | XZU434 | J05C
• Oil seal: AZ4079-F

A specialised tool for quickly / safely installing rear oil seals on Isuzu trucks with 4JJ1 engines. An essential tool to avoid damaging oil seals during installation.

This tool is designed to suit a wide range of late model Isuzu vehicles with 4JJ1 engines. For earlier model vehicles, refer ET1261A.

• Genuine oil seals: 8-97071-561-1 | BZ4962E
• Applications: 3.5T 4JB1 | 4JG2 | 4JH1 | 4JJ1 130HP / 150HP
• Chassis: NKR69 (4JG2) (94-) | NKR77 (4JH1-TC (02-) | NLR85 (4JJ1-TCS) (08-) | NNR85 (4JJ1-TCS) (08-)/li>

A specialised tool for safely installing crankshaft rear oil seals on UD trucks.

• Applications: Nissan UD trucks (CW520 | CW530)
• Oil seal genuine # BZ5333E | BZ4938E

Toothed socket for servicing the diesel injection nozzle on Mercedes-Benz, Man and Scania commercial vehicles.

• Toothed socket
• Complete with M14 puller
• 22mm ID / 30mm OD

Specialised impact e-torx socket for crankshaft bolts on commercial vehicles, especially Scania.

• E-28 e-torx socket
• 3/4" Sq Drv
• 90mm OL

A special wrench designed for removing / installing the oil mist separator on Fuso 380 trucks (over 17 ton). Also suits buses, including Mitsubishi Canter Eco4 (3.5 | 6.7 | 9 ton).

• Applications: Fuso 380 (engine code 6M70)
• Oil filter number: A66-GF30
• 109mm diameter
• 8 ribs
• 1/2" Sq Drv

A specialised crankshaft rear oil seal installation tool. This tool is essential for safely installing the rear oil seal. Part of the Endeavour Tools range of oil seal installation tools.

• Application: Mitsubishi Fuso Canter | Rosa
• Engine codes: 4D33 | 4D34
• Suits genuine oil seal: BZ4603E

Specialised rear crankshaft oil seal removal tool for a wide range of popular Fuso engines.

• FUSO Canter / Rosa - 4D31 | 4D33 | 4D34 | 4M50 | 6D14 | 6D16 | 6D31 | 6D34 | 6D60 | 6M61 | 6M34 | 6M60 | GM60
• OEM Equiv M061470 | MH062677 (Slinger ME017-240)
• Oil seal: BZ4603B - 100mm x 124mm x 13.3mm

A specialised wrench to adjust the brakes on Hino #700 trucks.

• Application: #700 Hino trucks

An essential tool for avoiding damage when installing the rear crankshaft oil seal on Hino E13C trucks.

• Applications: Hino E13C trucks - 390 / 420 / 446 HP (700)
• Genuine oil seal: BZ5222F

A special wrench designed for removing / installing the oil mist separator on Hino trucks (03-06) and also after 2010.

• 107mm diameter | 8 ribs
• 1/2" Sq Drv
• Oil filter number: 103251 / S23401-11840-A

A specialised oil seal tool for safely removing / installing the rear crankshaft oil seal tool on Hino trucks. Part of the Endeavour Tools range of oil seal installation tools.

• Applications: P11C (330HP) (1999-2002), K13CTV (360HP) (1999-2002)
• Genuine oil seal: BZ5377F

This impact socket is part of Endeavour's specialty range of 1" Sq Drv 6 point thin wall impact sockets designed for truck servicing. Sizes cover an extensive range from 70mm through to 200mm.

• 115mm diameter
• 6 point
• 1" Sq Drv

This impact socket is part of Endeavour's specialty range of 3/4" Sq Drv 6 point thin wall impact sockets designed for truck servicing. Sizes cover an extensive range from 70mm through to 200mm.

• 115mm diameter
• 6 point
• 3/4" Sq Drv

This tool is designed for the safe / precise installation of front oil seals on Isuzu 4JJ1 engines (after 2011).

• Suits genuine seals: XZ1262E | 8981581100
• OEM Equiv: EN-50611

A specialised oil seal installation tool for crankshaft front / rear oil seals on Isuzu trucks. Part of the Endeavour range of oil seal installation tools.

• Engine codes: 6UZ1 | 6SD1
• Original oil seals: 109625-5403 (Front) | 109625-5412 (Rear)

Also timing cover centering.

• Engines: Iveco F1C Fuse Lift cars (Euro 5)
• Application: Daily
• OEM Equiv: Iveco 99346258 Fuso MH063962

A specialised axle nut socket for Iveco Eurotech Cursor trucks. Made from Chrome Moly steel, this socket is very durable, and suitable for use with impact / torque wrenches.

• Size: 105mm | 12 Point (across flats)
• Use with 36mm spanner | 6 Point drive
• Chrome Moly construction

A specialised manual sleeve puller set which is designed to remove cylinder sleeves from most bus, tractor, truck and other vehicle engines.

The kit includes sleeve remover plates to suit: Fuso 3.5 tons, Fuso 15 tons, Fuso 330, Hino 750, Scania 310, Volvo FL10 | FM12. These plates will also suit many other vehicles.

The kit is suitable for both wet and dry sleeves and does not require removal of head studs.

• Sleeve pulling plates: 119mm ID | 130mm OD, 129mm ID | 142mm OD, 126mm ID | 138.5mm OD, 134mm ID | 140mm OD, 136.5mm ID | 147mm OD, 126mm ID | 140mm OD

Professional quality six internal teeth socket for removlng / installing the axle drive nut on Mercedes / MAN trucks.

• 100.5mm internal dia | 111mm outside dia
• 6 teeth (internal) | 11.5mm teeth width
• 3/4" Sq Drv

An essential time saving tool for installing rear oil seals on Mercedes Actros / Atego trucks. Part of the Endeavour Tools range of oil seal installers.

• Ring size with thickness: 7.5 / 17.5 / 20 / 36mm
• Suitable for double seals (for example, 746.21 | 748.59)
• Applications: Mercedes Actros | Atego
• OEM Equiv: 748589041500 | 748589006300

A specialised socket for fixing bearings when removing / installing the rear axle nut. Can be used with a torque wrench. Professional quality construction (SCM440 steel).

• 101.5mm inner dia | 110mm outer dia
• 12 Point
• 3/4" Sq Drv
• OEM Equiv: 740589000700

Cup style oil filter wrench for Isuzu / Hino trucks (17T | Euro 4).

• 118mm | 16 Points
• 1/2" Sq Drv

A specialised oil filter wrench to remove oil filters on pre 2006 Hino 15 Ton vehicles. Part of the Endeavour range of specialty oil filter wrenches.

• 108mm diameter
• 16 Points
• 1/2" Sq Drv

A heavy duty oil filter wrench for installing / dismantling the oil filter cover when changing the oil filter insert. Suits Fuso 6.5T | 6.8T | 7.7T vehicles.

• 106.5mm | 16 Point
• 1/2" Sq Drv

A specialised tool for removing the Isuzu petrol filter on FRR90 trucks.

• Size: 87mm diameter x 12 ribs

A specialised wrench for installing / removing the oil mist separator on Hino Euro 5 trucks.

• Applications: 3.5T / 7.5T / 8.5T
• 86mm x 12F
• 1/2" Sq Drv

This piston ring installation sleeve tool has a special cone design to easily insert the piston ring into the cylinder sleeve.

• Application: DAF Trucks

A specialised radiator adaptor set for removing radiator fluid on Scania trucks and buses. The set comprises two adaptors - a standard adaptor for models before 2016, and a second adaptor (to be used in conjunction) for later models (post 2016).

• Applications: Scania 340 / 360 and Euro6
• OEM equiv: 2437252 (99301)

This eight sided socket is designed specifically for front wheel nuts on Scania trucks.

• Applications: Scania P230 | P270 | P280 | P310 | P320 | P340 | P360 | P380 | P400 | P420 | R310 | R340 | R380 | R400 | R420 | R440 | R470 | R480 | R500 | R560 | R620 | R730 | G360 | G400 | G440 | G480
• 8 sided impact socket | 80mm diameter
• 1" Sq Drv
• OEM Equiv: 99307