Body & Chassis

A special tool for removing the air bag module from the steering wheel.

• Removes airbag module on Ford, Holden, Mercedes vehicles.

A specialised kit for the safe removal of airbags on most vehicles, including BMW | Holden | Mercedes | Renault | VAG. Includes a range of 1/4" Sq Drv hex and Torx bit sockets.

Airbag removal tools

• 99-04 VW Passat | Polo | Golf | Bora | A4 | A6 (2x)
• VW Golf | Beetle & Seat (2x)
• VW Golf (98-04) | Passat (97) | Bora (99)
• VW Passat (00)
• VW Passat | Jetta | Golf | Beetle (99-04)

1/4" Sq Drv bit sockets

• Torx T25: BMW
• Torx T30: Audi | Holden | Renault | VW
• Torx (Sec) T25-H: BMW
• Torx (Sec) T30-H: Audi | BMW | Holden | Mercedes
• Hex 5mm: Audi

A specialised kit for the safe removal of airbags on most vehicles, including BMW | Holden | Mercedes | Renault and VAG vehicles. Includes a range of 1/4" Sq Drv hex and Torx bit sockets.

• Includes additional removal tools for Ford and VE Commodore airbags.

Specialised tool for the correct release of the driver's side front SIR inflator module from the steering wheel. Insert the tool into the access hole behind the steering wheel, and press the tool towards the front of the vehicle to release the retaining clips. Rotate the steering wheel 180 degrees to expose the other access hole, and repeat the process.

It is important that correct tools are used to safely remove airbags.

• Application: VE Commodore
• OEM Equiv: EL-48508

These pliers feature a two step tip that provides better support under the clip head than conventional panel clip pliers. This design allows for better clip removal, with less risk of damaging the clip.

• Tapered forks slide under most types of auto body clips.

Designed for BWM vehicles, but the support arms are adjustable so it will also fit a variety of other vehicles. Easy to use and saves a lot of time when removing stuck windscreen wiper arms.

• Applications: E12 | E21 | E23 | E24 | E28 | E30 | E31 | E32 | E32 | E34 | E36 | E38 | E39 | E46 | E53 | E60 | E65 | E66 | E85

Ensure a perfect welded butt joint. Holds panels edge to edge, with almost no gap. Level adjustment (0-3mm) allows flat alignment on top or bottom surface of panels. Set contains four clamps.

A clever design for removal / installation either at the vehicle or mounted in a vice. Use your own sockets! Use any combination of 1/4" - 1/2" Sq Drv sockets. Eight adaptors hold the sockets in place. Ideal for use on cars, trucks, farm machinery etc.

• 2.5 Ton capacity
• 190mm opening
• 1/4" - 1/2" Sq Drv socket adaptors

Extra length and offset body for removal of internal handles. Reaches handle clip for instant removal without damage to upholstery.

Removes door handle and window winder spring clips with a single push. When the clip is removed it stays in the handle for easy reinstallation. Suitable for both small and large clips.

• Ideal for Ford / Holden door handle and window regulator clips.
• 180mm overall length

Offset design easily removes door handles.

A simple to use tool for safe / efficient extraction of door pins. Kit includes 3 different size hinge pins - 3 x 110mm, 5 x 110mm, 5.5 x 110mm).

• Replacement pin set available (DA6874).

Replacement door hinge pins for the DA6871 kit.

• 3 x 110mm, 5 x 110mm, 5.5 x 110mm

Introducing a new range of rechargeable soldering irons for more aggressive soldering needs. Featuring 80W soldering power - a 50% step up over our existing range. Extra large 2,400mAh Li-Ion battery allowing for extended use. Fast start up, and fast cooldown for more efficient / safer operation. Charging time 2.5 - 3 hours.

• 150W Hot staple tip
• 60W Plastic welding tip
• 60W Plastic welding tip with guide pipe
• Assorted staples / plastic rods
• 650 deg C max temperature
• Battery power indicator
• LED lights for illumination
• 17 tips available separately

Replacement chisel welding tip for the ETPRO-PS kit.

Replacement dual welding tip for the ETPRO-PS kit.

Plastic welders were designed to repair small to medium damage to components that would otherwise need to be replaced.

Now with a rechargeable lithium battery. Up to 150 staples in a single charge!

• For welding / repairing plastic parts, such as vehicle bumpers, cracks, broken fixtures etc
• Kit includes 9mm | 12mm welding tips, steel mesh (10cm x 6cm), ABS | PE | PP | PS welding rods

• FULLY PORTABLE
• REPAIR SMALL PLASTIC COMPONENTS

Replacement welding tip for the ETPRO-PS kit.

This scriber is designed for scribing / marking on metal, glass, plastic surfaces, and is also suitable for removing o-rings. Made from solid metal with hardened tips for extra durability.

• Straight tip | 90 degree tip
• 190mm overall length

For accessing special fasteners on door hinges / handles of Audi | Mercedes | Porsche | VW vehicles.

Extra long drivers are essential for accessing hinges.

• Torx T30 Screwdriver x 250mm Blade Length (Mercedes)
• Torx T20 T-Bar x 210mm Blade Length (VW / Mercedes)
• Ratchet wrench (to suit insert bits)

Insert Bits

• M4 Spline X " Hex Drive X 25mm OL (VW / AUDI)
• M8 Spline X " Hex Drive X 25mm OL (PORSCHE)
• M10 Spline X " Hex Drive X 25mm LONG (MERCEDES)
• T40 Torx X " Hex Drive X 25mm OL
• T45 Torx X " Hex Drive X 25mm OL

A convenient tool for expanding tailpipes. Simply place inside the tailpipe and turn the inside hex nut to expand the diameter of the tube.

• 30 - 44mm diameter
• Extra long hex rod

This kit contains four keys which are necessary for the removal of the radio from Ford Focus vehicles.

The world's smallest locking pliers! Straight line motion for jaw clamping. Made in Spain quality.

• 92mm OL

Extended reach hook & picks designed for reaching confined spaces and to get the job done with ease. Cushion grip handles for added comfort and leverage.

• 250mm overall length
• Heat treated tool steel shaft hardened to 50 - 58 HRC
• Straight Pick | Complex Pick | Combination Pick | Double Angle Pick | 90 Degree Pick | 180 Degree Pick

Abrasive holder with polished wooden handle. Retaining clips hold abrasive paper firmly.

• Surface size: 70 x 230mm

Uses induction technology to accurately deliver concentrated heat for removing rusted / corroded ferrous objects.

Faster / safer / more precise than oxy-acetylene.

Minimises risk of collateral damage, and reduces the cool down period saving time & money.

• Supplied with 3 coils & 1m rope coil

This socket retails the seat track on late model Holden light trucks & SUVs.

A high quality set of non-marring plastic trim removal tools.

The universal hook tool features multiple profiles for those tight spots that other tools simply will not fit in.

The combination wedge tool is excellent for lifting bezel edges, and for the removal of molded body trim pieces, without damaging them.

• 2 piece set

Knurled handle for firm grip. Stainless steel hook and pick points for removing O-rings, seals, grommets etc.

These scribers are constructed from solid metal with hardened tips for extra durability.

• Hooked tip | 45 degree Angled tip
• 220mm overall length

Includes hand pump with air control valve. The air bags are gentle on glass, frames and paintwork. Each bag is made from tough reinforced fabric.

A simple and effective tool for dent removal, or raising items like doors for easy fitment.

• Bag sizes: 57 x 190mm | 60 x 180mm | 160 x 160mm

Easily removes front and tail light covers without creating cracks. Universal application for light covers with clips, but not for those fixed with screws and nuts.

• Slip-resistant handle provides secure grip
• Plastic probes avoid scratching light cover surface

A three piece set, with six different ends, for light duty prying of interior bezels, small plastic clips etc.

Manufactured from strong, lightweight nylon fibres, these pry bars are ideal for removing / installing o-rings, gaskets, smoothing adhesives, or light prying tasks.

• 3 pce set

This kit is designed for opening locked doors on a range of vehicles. Consult your vehicle manual on how to best open doors on specific vehicles.

• Universal application
• Includes hooks, long picks, straps, wedges etc
• Supplied in vinyl wallet

Heavy duty suction dent puller with slide hammer. Manual vacuum pump for portable use.

• Supplied with 3 suction pads and 1 hook
• 2.5kg slide hammer

This sleeve tool is designed to facilitate the removal / installation of the electronic ignition switch (EIS / EZS) without damaging the retaining ring fitted to Mercedes vehicles.

• Applications: W140 | W164 | W169 | W202 | W203 | W210 | W211 | W215 | W219 | W220 | W221 | W245 | W251 | W414
• OEM Equiv: 129 589 00 007 00.

A specialised socket for early model Mercedes (1978 - 1997) to turn the covering cap when removing / installing the locking cylinder on the ignition switch.

• Models: W123 | W124 | W126 | W129 | W140 | W163 | W170 | W202 | W210 and most early models (1978-1997)
• OEM Equiv: 202589001400

An extra long hex socket for N55 valve cover bolts. Also suits rear bumper screws on Mercedes C Class vehicles (W204) and selected Audi models. Designed for controlled screwing using torque values specified in the factory manual.

• Engine: N55
• Applications (rear bumper screw): Mercedes C-Class (W204), Audi: A3 (since 2004) | A4 (since 2001) | A6 (since 2005) | TT (since 2007)
• 10mm hex |120mm overall length
• 1/2" Sq Drv

These levers are made from tough polycarbonate, for durability, while avoiding damaging paintwork when prying clips etc.

This set contains 6 handy levers, all 8" (200mm) long.

• Slim profile for removing dash trim, panels etc