Introducing a new range of rechargeable soldering irons for more aggressive soldering needs. Featuring 80W soldering power - a 50% step up over our existing range. Extra large 2,400mAh Li-Ion battery allowing for extended use. Fast start up, and fast cooldown for more efficient / safer operation. Charging time 2.5 - 3 hours.

• 150W Hot staple tip
• 60W Plastic welding tip
• 60W Plastic welding tip with guide pipe
• Assorted staples / plastic rods
• 650 deg C max temperature
• Battery power indicator
• LED lights for illumination
• 17 tips available separately

Perform battery checks, charging system checks, fuse checks, voltage checks, component tests...

All at the flick of the switch, while being guided through with our two NEW menu options: EZLEARNING and EZDIAGNOSTIC.

• New larger LCD screen
• Upside down? No problem! New flip screen feature
• Menu driven. Makes navigating a breeze

Professional one person brake and clutch bleeding. Simply connect the adaptor to the master cylinder, fill the container with brake fluid, and pump. No external power source is required.

• 2.8 litre capacity
• Supplied with 44mm adaptor that suits many European vehicles
• Other adaptors available separately

Air hammer extractor adaptor for efficiently removing stuck injectors / bushes. Adaptors for removing Bosch / Delphi / Denso injectors, including Bosch solenoid valve Diesel injector and EGR / AGR valves.

Designed to work with any standard air hammer (available separately).

• M25 x 1.0 adaptor | Siemens injectors
• M20 x 1.0 adaptor | Denso injectors
• M27 x 1.0 adaptor | Siemens injectors
• M12 x 1.75 (Int) | High pressure pipe union (on top of injectors)
• M14 x 1.5 (Int) | Delphi injectors
5/8" UNF thread | Universal joint for difficult access
• M17 (Int) / M27 x 1.0 (Ext) | For removing dual connector adaptor on Bosch injectors
• 17mm hex drive / 10mm hex | For removing the internal part of Bosch injectors

Introducing a new range of rechargeable soldering irons for more aggressive soldering needs. Featuring 80W soldering power - a 50% step up over our existing range. Extra large 2,400mAh Li-Ion battery allowing for extended use. Fast start up, and fast cooldown for more efficient / safer operation. Charging time 2.5 - 3 hours.

• 80W Chisel type tip
• 80W Cone type tip
• 90W Heat Shrink tip
• 90W Hot Knife
• 650 deg C max temperature
• Battery power indicator
• LED lights for illumination
• 17 tips available separately

Ensure a perfect welded butt joint. Holds panels edge to edge, with almost no gap. Level adjustment (0-3mm) allows flat alignment on top or bottom surface of panels. Set contains four clamps.

Introducing a new range of rechargeable soldering irons for more aggressive soldering needs. Featuring 80W soldering power - a 50% step up over our existing range. Extra large 2,400mAh Li-Ion battery allowing for extended use. Fast start up, and fast cooldown for more efficient / safer operation. Charging time 2.5 - 3 hours.

• 150W Hot staple tip
• 60W Plastic welding tip
• 60W Plastic welding tip with guide pipe
• Assorted staples / plastic rods
• 650 deg C max temperature
• Battery power indicator
• LED lights for illumination
• 17 tips available separately

Replacement chisel welding tip for the ETPRO-PS kit.

Replacement dual welding tip for the ETPRO-PS kit.

Replacement welding tip for the ETPRO-PS kit.

A convenient tool for expanding tailpipes. Simply place inside the tailpipe and turn the inside hex nut to expand the diameter of the tube.

• 30 - 44mm diameter
• Extra long hex rod