Sunflag Ball End Hex Driver Set
8 Pce
SKU: SHB-8
Sunflag ball end hex drivers are precision made in Japan, for professional use. This set of 8 screwdrivers is packaged in a clear plastic pocket.
- 8 Pce
- Sizes: 1.5 | 2 | 2.5 | 3 | 4 | 5 | 6 | 8mm
Ball End Hex Driver | 1.5mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 1.5mm ball hex
- 95mm blade length
Ball Hex Driver | 2.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 2.0mm ball hex
- 100mm blade length
Ball End Hex Driver | 2.5mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 2.5mm ball hex
- 1100mm blade length
Ball End Hex Driver | 3.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 3.0mm ball hex
- 115mm blade length
Ball End Hex Driver | 4.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 4.0mm ball hex
- 130mm blade length
Ball End Hex Driver | 5.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 5.0mm ball hex
- 140mm blade length
Ball End Hex Driver | 6.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 6.0mm ball hex
- 150mm blade length
Ball End Hex Driver | 8.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 8.0mm ball hex
- 180mm blade length
Ball End Hex Driver | 1.5mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 1.5mm ball hex
- 95mm blade length
Ball Hex Driver | 2.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 2.0mm ball hex
- 100mm blade length
Ball End Hex Driver | 2.5mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 2.5mm ball hex
- 1100mm blade length
Ball End Hex Driver | 3.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 3.0mm ball hex
- 115mm blade length
Ball End Hex Driver | 4.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 4.0mm ball hex
- 130mm blade length
Ball End Hex Driver | 5.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 5.0mm ball hex
- 140mm blade length
Ball End Hex Driver | 6.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 6.0mm ball hex
- 150mm blade length
Ball End Hex Driver | 8.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 8.0mm ball hex
- 180mm blade length
| SKU | SHB-8 |
| Barcode # | 9321280230965 |
| Brand | Sunflag |
| Product weight | 0.5200kg |
| Shipping weight | 0.520000kg |
12 Months
Calculate Shipping
Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
More from this category
Sunflag Ball Hex Power Bit Set
This set contains four ball end hex power bits. The ball hex design allows these bits to be used to drive fasteners at an angle up to 30 degrees. Ideal for use with power tools.
- 3mm | 4mm | 5mm | 6mm
- 85mm overall length
- 1/4" hex drive