Sunflag
Automatic Centre Punch
A genuine Sunglag - made in Japan - automatic centre punch. Tool strikes a blow when pressure applied. Cap adjusts force of blow.
Simply adjust to desired spring tension. Then press firmly to generate an automatic centre punch. No hammer required for operation.
- Replacement tip available (AP-6).
Ball End Hex Driver | 1.5mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 1.5mm ball hex
- 95mm blade length
Ball End Hex Driver | 2.5mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 2.5mm ball hex
- 1100mm blade length
Ball End Hex Driver | 3.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 3.0mm ball hex
- 115mm blade length
Ball End Hex Driver | 4.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 4.0mm ball hex
- 130mm blade length
Ball End Hex Driver | 5.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 5.0mm ball hex
- 140mm blade length
Ball End Hex Driver | 6.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 6.0mm ball hex
- 150mm blade length
Ball End Hex Driver | 8.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 8.0mm ball hex
- 180mm blade length
Ball Hex Driver | 2.0mm
Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.
- 2.0mm ball hex
- 100mm blade length
Ball Hex Power Bit
A high quality ball hex power bit. The ball hex design allows socket head screws to be driven at an angle up to 30 degrees. Ideal for use with air / power tools.
- 3.0mm ball hex power bit
- 85mm overall length
- 1/4" hex drive
Ball Hex Power Bit
A high quality ball hex power bit. The ball hex design allows socket head screws to be driven at an angle up to 30 degrees. Ideal for use with air / power tools.
- 4.0mm ball hex power bit
- 85mm overall length
- 1/4" hex drive
Ball Hex Power Bit
A high quality ball hex power bit. The ball hex design allows socket head screws to be driven at an angle up to 30 degrees. Ideal for use with air / power tools.
- 5.0mm ball hex power bit
- 85mm overall length
- 1/4" hex drive
Ball Hex Power Bit
A high quality ball hex power bit. The ball hex design allows socket head screws to be driven at an angle up to 30 degrees. Ideal for use with air / power tools.
- 6.0mm ball hex power bit
- 85mm overall length
- 1/4" hex drive
Deep Socket Driver
A specialised driver for 8mm hex bolts. The deep (60mm) design allows the driver to be used to drive recessed bolts.
Deep Socket Driver
A specialised driver for 10mm hex bolts. The deep (60mm) design allows the driver to be used to drive recessed bolts.
- 8mm hex | 6 Point driver
- 150mm blade length
Flexible Power Shaft w/ Chuck
This flexible power shaft is designed for precision work. With a 130cm long extension, the power shaft also comes with a 3 spring type chuck. Ideal for general handcraft work including polishing wood, stone, metal etc
- 1.5 - 6.5mm capacity chuck
- 1300mm flexible shaft length
- 2,800 - 4,000 RPM
- Apply up to 3.9Nm torque only
Mini Flexible Power Shaft
This mini flexible power shaft is designed for precision work. With a 100cm long extension, the power shaft also comes with a collet chuck, with 5 individual collet sizes. Ideal for precision handcraft work.
- 1.8 - 4.0mm capacity collet chuck (collet sizes: 2.0 | 2.5 | 3.0 | 3.5| 4.0mm)
- 1000mm flexible shaft length
- 2,000 - 3,000 RPM
- Apply up to 2.0Nm torque only
Phillips | #2 x 200mm
The 888 series are Sunflag's premium quality screwdriver series. These screwdrivers - made in Japan - feature Sunflag's famous soft grip handles, and hardened tip for long lasting performance. These screwdrivers also have a tang thru design, and a magnetised tip.
This screwdriver has a magnetised Tang-Thru blade which can be struck by a hammer.
- #2 Phillips screwdriver
- 200mm blade length
- JIS compliant
Phillips Screwdriver | #1 x 75mm
Premium quality Sunflag tang thru Phillips screwdriver, with heavy duty blade. The tang thru design allows the driver head to be struck with a hammer to help release the screw. Sunflag screwdrivers are made in Japan.
- 75mm blade length
- #1 Phillips
- Crystalline handle
Phillips Screwdriver | #2 x 100mm
Premium quality Sunflag tang thru Phillips screwdriver, with heavy duty blade. The tang thru design allows the driver head to be struck with a hammer to help release the screw. Sunflag screwdrivers are made in Japan.
- 100mm blade length
- #2 Phillips
- Crystalline handle
Phillips Screwdriver | #3 x 150mm
Premium quality Sunflag tang thru Phillips screwdriver, with heavy duty blade. The tang thru design allows the driver head to be struck with a hammer to help release the screw. Sunflag screwdrivers are made in Japan.
- 150mm blade length
- #3 Phillips
- Crystalline handle