The Air Boy 124140113 Blow Gun is a high-performance compressed air tool designed for cleaning, drying, and blow-off applications. Featuring a straight 500mm pipe, this blow gun provides extended reach, making it ideal for hard-to-access areas in workshops, garages, and industrial settings.

Built with impact-resistant acetal plastic, the ergonomic handle and large trigger ensure precise airflow control for efficient operation. With a maximum working pressure of 16 bar, this blow gun delivers powerful air output while maintaining low noise levels for user comfort.

Made in Denmark quality. Lifetime guarantee on the valve mechanism.

• Pipe length: 500mm
• Pipe dia: 8mm
• Inlet size: 1/4" BSP

The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

The Sonsbeek truck tyre inflator is designed to reliably inflate truck tyres up to 220 PSI. The inflator has a large 90mm dial gauge for easy reading. The unit is designed for inflation, deflation and measurement.

The inflator is designed for rugged applications, and is supplied with a rubber impact protector on the gauge, rubber grip on the chuck, and a pressed steel lever.

One button operation

• 90mm dial for easy reading
• 220 PSI scale
• 1m hose length
• Rubber gauge protector

Air Boy thrust guns provide a very high air flow, and offer a safe solution, as the nozzle is unblockable. The thrust nozzle increases airflow by 100% due to the venturi principle.

Air Boy thrust guns have a wide range of cleaning applications in commercial vehicles, trade and industry.

• Max 12 bar pressure
• 600 litres / min @ 8 Bar
• 98.2 dB @ 8 Bar

The AutoSim Pro Master Kit is a professional-grade automotive sensor simulator and signal generator, designed to streamline diagnostics and fault analysis across a wide range of vehicle systems. Whether you're working on cars or trucks, this handheld device replicates real-world sensor and actuator signals, allowing technicians to test wiring, ECUs, and components without unnecessary replacements.

Detect whether the ECU, a feed, plug in connection, or sensor is defective. Eliminate faults without simply replacing parts on suspicion only.

Key features:

• Signal Simulation: Generates voltage, frequency, PWM, and O sensor signals to mimic real sensor behavior.
• Waveform Variety: Supports sine, square, triangular, and ramp signals with adjustable frequency and amplitude.
• Actuator Activation: Drives actuators with up to 4A continuous current, simulating real operating conditions.
• Precision Control: Offers fine-tuned output settings with 0.1% duty cycle accuracy and 10mV voltage steps.
• User-Friendly Interface: Illuminated 2.4" TFT LCD display and intuitive function keys for quick setup and operation.
• Robust Protection: Includes reverse polarity, over-voltage, thermal shutdown, and short-circuit safeguard.

CONTAINS ET0098PRO PLUS:

• Insulated crocodile clips (Red & Black)
• Back Probe set (5 needles)
• Crocodile Clip 25A, Red & Black
• Crocodile Clip 15 A, Blue
• Pluggable Terminal Block (2-Pin, 5mm)

The 888 series are Sunflag's premium quality screwdriver series. These screwdrivers - made in Japan - feature Sunflag's famous soft grip handles, and hardened tip for long lasting performance. These screwdrivers also have a tang thru design, and a magnetised tip.

This screwdriver has a magnetised Tang-Thru blade which can be struck by a hammer.

• #2 Phillips screwdriver
• 200mm blade length
• JIS compliant

Crafted with meticulous Japanese engineering, the Sunflag 10-P Series Screwdriver is designed for fine-detail work where accuracy and control are paramount. Whether you're servicing electronics, working on delicate instruments, or assembling precision components, this tool delivers dependable performance in a compact form.

• Ultra-Fine Shaft: The slim 3mm shaft allows access to tight spaces and recessed screws without damaging surrounding components.
• Phillips Head (#00): Ideal for micro screws commonly found in electronics, cameras, and precision devices.
• 75mm shafft length

This screwdriver has an extra long shaft for reaching into those hard to reach places. High quality with a hardened chrome vanadium steel shaft, and comfort grip handle.

• #2 Phillips screwdriver
• 730mm overall length

The Sunflag 666 series are designed for the professional user, who does not require the tang thru design of the 888 series driver.

Like all Sunflag tools, these drivers feature a precision tip, with Sunflag's famous soft grip handles for ergonomic use.

• #0 Phillips screwdriver
• 100mm blade length
• JIS compliant

The Sunflag 666 series are designed for the professional user, who does not require the tang thru design of the 888 series driver.

Like all Sunflag tools, these drivers feature a precision tip, with Sunflag's famous soft grip handles for ergonomic use.

• #0 Phillips screwdriver
• 75mm blade length
• JIS compliant

The Sunflag 666 series are designed for the professional user, who does not require the tang thru design of the 888 series driver.

Like all Sunflag tools, these drivers feature a precision tip, with Sunflag's famous soft grip handles for ergonomic use.

• #1 Phillips screwdriver
• 75mm blade length
• JIS compliant