An oil filling funnel for Toyota vehicles. The funnel is designed to connect directly to oil filler necks, avoiding oil spills. Lower transparent chamber shows oil flows down to the engine.

Engine oil bottles can be put up side down - allowing a hands-free / one-person operation.

Adjustable light intensity, together with UV light / laser pointer

• 450 lumen main light
• Charge via USB-C cable
• 365nm UV light

A specialised time saving oil funnel for VAG vehicles. This kit includes three adaptors, that fit most late model VAG vehicles, plus some BMW / Mercedes.

Adaptors attach firmly to the oil filler neck allowing for spill free / one handed filling.

• Twist type adaptor for most recent VAG models.
• Clip type adaptor for VAG, as well as BMW / Mercedes
• Knob type adaptor for VAG 1.5L petrol engines.
• Transparent lower chamber. Refer to attached manual for vehicle fitment information.

Measures up to 20A (and as low as 1 milliamp). Displays current in realtime. Adaptors work with all Power Probe circuit testers!

The PPPWM is an adapter that is plugged into Power Probe products with 4mm banana plugs (such as THE MAESTRO / PP4 / PP3 / PP3EZ etc).

The adapter can be set for the output 0-100% pulse width drive waveform by pressing the key. It is mainly used for automotive applications such as automotive fan circuit detection, to find the part of the circuit failure, in order to replace and repair.

Duty cycle adjustable 5% - 100%.

For 12V / 24V use. 10A max continuous output.

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar. This high pressure bleeder is compatible with electro-hydraulic braking systems that operate at a higher pressure than conventional systems.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.
• Adjustable pressure from 0 - 3 Bar.
• Powered by the vehicle's 12V battery
• Compatible with DOT 3 | DOT 4 | DOT 5.1 brake fluids

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

A pack of high quality Roloc style CDR discs. These discs are designed for use with Roloc style sanders. These discs are made from high quality felt.

• 2" diameter
• Felt material
• 10 pack

This test performs leak down tests which can be more accurate than normal compression tests.

Leak down tests can be used to detect various engine faults including leakage past rings, head gaskets, intake / exhaust valves etc.

• Requires air source of 70-160PSI, as the unit will pressurise system to 60PSI.
• Spark plus thread hoses: 10, 12, 14mm | regulator & o-rings

This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• CAT III 600V rating