The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

Bluetooth Clamp Meter with Multimeter & Oscilloscope Functions

Connect up to three clamp meters to a single Bluetooth appÑperfect for diagnosing 3-phase EV motors. Offers advanced measurement capabilities with multimeter and oscilloscope functions, plus convenient data management features.

• Bluetooth Connectivity - Link up to 3 meters for simultaneous monitoring
• Rechargeable Battery - Long lasting power for field use
• 2.8" LCD Display - Clear, high resolution readout
• 38mm Jaw Opening - Suitable for large conductors
• Measurement Range:
• 1,000V AC/DC
• 1,000A AC/DC
• Resistance, Capacitance, Frequency, Duty Cycle
• Oscilloscope - 1 channel, 1kHz bandwidth, 5.0MSa/s sampling rate
• Data Features - Read offline recordings, view data charts, share recordings, and set threshold alarms for proactive diagnostics

Break into the fuse panel quickly & easily. 4mm banana connectors. For use with standard multimeters.

• Maxi blade fuses
• 20A / 12 - 48V DC measuring range
• +/- 2% accuracy

Handy lead set that allows you to plug into the cigarette adaptor to read battery voltage etc.

Compatible with standard multimeter plugs.

A current looper for use with clamp meters for electrical circuit fault diagnosis.

• Suits mini type automotive fuses.
• Inline fuse holder for original fuse.
• For diagnostic testing.

A current looper for use with clamp meters for electrical circuit fault diagnosis.

• Suits standard automotive fuses
• Inline fuse holder for original fuse
• For diagnostic testing

Use with clamp meters for electrical circuit fault diagnosis. An efficient way to monitor amperage draw through a fused circuit

• Inline fuse holder for original fuse

Break into the fuse panel quickly & easily. 4mm banana connectors.
For use with stanadard multimeters

• Mini blade fuse
• 20A / 12-48V DC measuring range
• +/- 2% accuracy