Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.

• Potentiometer (variable resister) (1x)
• Signal tester / LED stroboscope (2x)
• Piercing probes (green / yellow)
• Test probe extension (2x)
• SRS (airbag) connector (1x)
• Crocodile clip adaptors (2x)
• Needle probes (4x)
• DMM test leads (2x)
• Banana plug extensions (4x)
• Flat terminals (8x)

Silvertronic multimeter leads are made in the UK. Designed for professional use, Silvertronic silicone leads are double insulated.

Silicone leads can withstand high temperature, including the heat of such things as hot manifolds and soldering iron tips.

• 1000V CAT III 20A
• 2m long cables (colour coded)
• Extra thin 0.7mm OD
• Supplied in a 4 pocket test lead organiser for convenient storage.

A pair of double insulated silicone test leads one end terminating in a straight fixed shrouded plug, the other in a right angled plug, both compatible with standard 4mm instrument sockets.

• 1.2m length
• Made in UK quality

This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required

This spill free funnel allows for refilling coolant while eliminating trapped air pockets. The kit includes adaptors for most vehicles, and extension / 45 degree elbows for those hard to reach radiator caps.

• Threaded cap / adaptors for Ford surge tanks / Holden threaded style radiators.

A set of support hooks which are ideal for holding the brake caliper, during brake service, to avoid damaging the brake pipes. Also a great solution for hanging other test equipment, such as replenishment bottles.

• Protective coating to avoid damage.
• Solid steel construction | Non flexible
• 2 piece set

Handy lead set that allows you to plug into the cigarette adaptor to read battery voltage etc.

Compatible with standard multimeter plugs.

A current looper for use with clamp meters for electrical circuit fault diagnosis.

• Suits mini type automotive fuses.
• Inline fuse holder for original fuse.
• For diagnostic testing.

A current looper for use with clamp meters for electrical circuit fault diagnosis.

• Suits standard automotive fuses
• Inline fuse holder for original fuse
• For diagnostic testing

Use with clamp meters for electrical circuit fault diagnosis. An efficient way to monitor amperage draw through a fused circuit

• Inline fuse holder for original fuse

Break into the fuse panel quickly & easily. 4mm banana connectors.
For use with stanadard multimeters

• Mini blade fuse
• 20A / 12-48V DC measuring range
• +/- 2% accuracy

Break into the fuse panel quickly & easily. 4mm banana connectors.

• 20A / 12 - 48V DC measuring range
• +/- 2% accuracy