These reels hold 6 metres of highly flexible double skinned silicone cable suitable for use with standard multimeters.

• 1000V CATIII double / reinforced insulation | 20 Amp current rating
• 4mm Straight plug / 4mm Right angle plug
• Fully compliant to IEC 61010-031:2015

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

The DM300AUTO is much more than a complete True RMS Digital Multimeter. It also includes several other functions of great utility for professionals in the automotive sector, such as checking the status of fuse protection, providing out of spec reading alerts, detecting parasitic draw, guiding automotive tests, checking the correct charging process of the alternator and measuring possible cranking voltages in the supply circuit.

The TFT colour display and the user friendly menu make this instrument an indispensable tool for automotive professionals.

• Measures current Flowing through fuses without removing the fuse (up to 80A)
• Fuse Voltage drop testing
• Guided automotive test such as Cranking Voltage / Alternator Charging
• AC/DC Voltage measurements up to 1000V
• Current measurements up to 30A
• Measures resistance, continuity and diode testing
• Frequency and duty cycle for PWM signals

Break into the fuse panel quickly & easily. 4mm banana connectors. For use with standard multimeters.

• Maxi blade fuses
• 20A / 12 - 48V DC measuring range
• +/- 2% accuracy

Handy lead set that allows you to plug into the cigarette adaptor to read battery voltage etc.

Compatible with standard multimeter plugs.

A current looper for use with clamp meters for electrical circuit fault diagnosis.

• Suits mini type automotive fuses.
• Inline fuse holder for original fuse.
• For diagnostic testing.

A current looper for use with clamp meters for electrical circuit fault diagnosis.

• Suits standard automotive fuses
• Inline fuse holder for original fuse
• For diagnostic testing

Use with clamp meters for electrical circuit fault diagnosis. An efficient way to monitor amperage draw through a fused circuit

• Inline fuse holder for original fuse

Break into the fuse panel quickly & easily. 4mm banana connectors.
For use with stanadard multimeters

• Mini blade fuse
• 20A / 12-48V DC measuring range
• +/- 2% accuracy