The Air Boy thrust gun is ideal for cleaning tasks where extremely high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

The standard nozzle supplied with the gun simply screws on / is replaceable. A 90 degree nozzle is available for purchase separately.

• 1/4" BSP inlet
• 300mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

A specialised tool for removing the vibration damper pulley on 2.0L EcoBlue engines fitted in the Ford Ranger | Kuga | Transit, from 2019. Allows for safe removal without damaging the bonded rubber section. Ensure that thrust screws are suitably greased, in accordance with manufacturer specifications.

• OEM Equiv: 303-1657
• Application: Ford Ranger | Transit | Transit Custom
• Engine: 2.0L EcoBlue | YN2S

A special 16 point impact socket for the centring valve of the camshaft timing on BMW & Mini Vanos unit and Ford VCT modules.

• Applications: BMW B38 | B48, Ford 1.0L EcoBoost
• 16 Point impact socket
• 22mm dia
• 1/2" Sq Drv

Required tools when replacing the crank seal / removing front engine cover to replace the chain. For use on 2.0L | 2.2L | 2.4L | 3.2L TDCi / TDDi Duratorq engines fitted to Ford Transit | Ford Ranger plus Jaguar X Type X400 and Land Rover Defender.

• First component removes diesel pump sprocket cover, and also allows oil seal to be removed / replaced.
• Second component aligns / centralises the front camshaft chain cover before fitting the new oil seal.

For 4 Cyl Pumpe Duse diesel engines (1.9L | 2.0L engine with 2 & 4 valve) with arrow at 12 o'clock position with round sprockets. Also suited to FORD, SEAT & SKODA 1.9L TDi PD 3 & 4 cylinder engines.

• OEM Equiv: T10050

For 1.0L 3 Cyl EcoBoost GDTi engines.

• OEM Equiv: 303-1602

Oil pump locking tool for 2.0L, 2.2L, 2.4L, 3.2L diesel engines and 2.3L Duratec petrol engines.

Allows the oil pump to be removed / replaced in the same position (to ensure that the oil pump is not operating with excessive side loads).

• Mondeo | Ranger | Transit (2.0 / 2.2 / 2.4 / 3.2 TDCi / TDDi / Di Duratorq)
• OEM Equiv: 303-705 | 303-1093 (PSA 0198H)

Locks camshafts in their timed position, when there is a need to remove the variable valve timing pulleys.

Use with ET0512.

• Applications: Ford Fiesta | Focus, Volvo V40 | S60 | V60
• Engine codes: Ford HXDA | HXJA | JQMA | PNDA | U5JA, Volvo B4164T
• OEM Equiv: 303-1552