A multipurpose fluid syringe ideal for the transfer of brake fluid, and other fluids from components such as differentials / gearboxes.

This syringe is fitted with EPDM seals which are designed for brake fluid. NBR seals are available as an option for oil transfer.

We supply these syringes with a BONUS wall mount.

• 200ml capacity
• Robust plastic construction
• Transparent design
• Dual seals

A stable power supply is essential when flashing / reprogramming / calibrating ADAS. This unit outputs 120A indefinitely, with variable voltage. Plus functions as a 120A battery charger.

IMPORTANT SAFETY NOTICE: This unit must be connected to a 15A circuit. The power cord supplied with the ET6102 must be used with this unit. This 15A cord has a larger earth pin.

Grinding down the earth pin to suit a standard 10A outlet or using an alternative cable with a 10A plug will damage the unit and void the warranty.

Based in Kansas USA, Clore has a 50 year heritage in developing battery technology for automotive professionals.

• 120A battery stabiliser
• 12 / 24V operation
• 120A / 40A / 10A battery charging modes
• 13ft Cables
• 120A Max Output For Both Car / Truck Applications
• Extremely Low Peak To Peak Ripple Voltage
• Adjustable Voltage Output
• 7-Phase Battery Charging Sequence
• No Voltage Drop
• Lead Acid Plus Lifep04 Batteries

A specially designed tool for removing and installing the valvetronic compression lever found on the rocker gear.

Use in conjunction with ET1699A.

• Engine: BMW MINI N18
• OEM Equiv: 119573

A specially designed tool to remove / install the valvetronic springs found on the rocker gear. This tool is an essential tool to safely remove and refit these springs.

Use in conjunction with ET1700A.

• Engine: BMW MINI N18
• OEM Equiv: 119 571 | 119572

These specialised pliers are designed to remove the Valvetronic tension springs on BMW N42 | N46 engines. These pliers are essential for servicing the loaded spring clips on the rocker gear on the camshaft.

• Open the pliers carefully to unload the spring / close pliers to tighten the spring while installing it.

Valve stem seals often become hard over time resulting in leaks between the stem and the seal. This time saving kit for specific BMW vehicles allows for seal replacement without the need to remove intake / exhaust cams saving both labour time, and avoiding the need to use expensive timing tools.

• Applications: N62 | N62TU

A specialised tool for removing / installing valve springs and intermediate levers, on BMW vehicles fitted with B38 | B48 | B48B petrol engines.

• OEM Equiv: 2 359 088 | 2 359 089

A specialised tool for compressing the valve spring for efficiently removing / installing the valve spring.

• Engine: BMW S63TU
• OEM Equiv: 2 249 160 (2249160)