Special grinder discs for rust removal on wheel hubs / brake discs on passenger cars / vans. Ensures flush fitment to wheel surfaces.

Ideal for use with electric / air powered drills, and impact wrenches.

• Inner dia: 90mm.
• Max speed: 1,500 RPM
• 1/2" sq drive

Replacement abrasive discs for the ET4074 hub cleaning kit.

• 5 pack

Ideal for quick cleaning / corrosion removal of car wheel hubs with stud bolts up to 40mm dia.

Replacememt abrasive discs available (ET4074-D).

• Use with cordless drill
• 3/8" Sq Drv adaptor included
• Max speeed: 1500 RPM

Special grinder discs for rust removal on wheel hubs / brake discs on passenger cars / vans. Ensures flush fitment to wheel surfaces.

Ideal for use with electric / air powered drills, and impact wrenches.

• Inner dia: 90mm.
• Max speed: 1,500 RPM
• 1/2" sq drive

Quickly removes corrosion / dirt. Quick change brushes suit both metric / imperial threads. Larger sizes suit commercial vehicles. Use by hand, or with cordless drill.

Wheel studs should be properly cleaned before refitting wheels / wheel nuts. A time saving solution to a common workshop task!

• Sizes: 12mm (7/16") | 13mm (1/2") | 14mm (9/16") | 16mm (5/8") | 22mm (7/8") | 28mm (1-1/8")
• 1/4" hex adaptor included, to use with air / electric drills.
• Cleaning brushes have a depth around 25 - 30mm.  Black hollow shaft has a further depth around 120mm.

Air hammer extractor adaptor for efficiently removing stuck injectors / bushes. Adaptors for removing Bosch / Delphi / Denso injectors, including Bosch solenoid valve Diesel injector and EGR / AGR valves.

Designed to work with any standard air hammer (available separately).

• M25 x 1.0 adaptor | Siemens injectors
• M20 x 1.0 adaptor | Denso injectors
• M27 x 1.0 adaptor | Siemens injectors
• M12 x 1.75 (Int) | High pressure pipe union (on top of injectors)
• M14 x 1.5 (Int) | Delphi injectors
5/8" UNF thread | Universal joint for difficult access
• M17 (Int) / M27 x 1.0 (Ext) | For removing dual connector adaptor on Bosch injectors
• 17mm hex drive / 10mm hex | For removing the internal part of Bosch injectors

A specially designed kit for trucks / SUVs with inaccessible wrench flats on inner tie rods.

The kit includes four crowsfoot adaptors to fit multiple applications. The long socket is designed to fit over the tie rod end, with the crowsfoot engaging on the lock socket.

• Crowsfoot adaptors: 1-7/16", 33.6mm, 38.4mm, 42mm

This hot knife is designed for use with the Endeavour series of rechargeable soldering irons.

• 25mm length
• Suits ETPRO-30 / ETPRO-50 soldering irons
• Supplied as part of ETPRO-30W kit

• Heat blower tip
• For PRO-90K