A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required

Our new updated radiator pressure test kit sets the new industry benchmark!

Faster, easier, and more comfortable to use, than existing kits.

Perform cooling system leak tests, vacuum type coolant refills, and leak tests on radiator caps.

• Updated adaptors (more coverage than older kits) - includes new Volvo Hybrids
• Updated pressure pump, coolant refill and adaptor design
• Faster refill speed - 91 ml / sec vs 37 ml
• Connectors are compatible with superceded adaptor kits

A new safety blow gun from Air Boy featuring high airflow | Low noise level | Unblockable tip | Integrated chip shield.

• 600l / min @ 8 bar
• 78 db @ 6 bar
• OSHA STD 1-13.1 compliant
• Industry leading airflow for a low noise blow gun

Highly accurate tester measures material thickness, including steel. For automotive, great for measuring piston head thickness.

• 90cm cable
• 5 mHz probe frequency
• 0.8 - 500mm range (steel)
• Up to 0.01mm resolution (1-99 mm)
• Accuracy: H<10mm, /- 0.05mm | 10-99mm /- (0.01 H/200) mm
• Next gen higher resolution

Connect up to three clamp meters to the one Bluetooth app! Ideal for diagnosing 3 phase EV motors!

Multimeter and oscilloscope functions. Feasures a rechargeable battery | 2.8" LCD | 38mm opening/

• 1,000V AC / DC
• 1,000A AC / DC
• Resistance / Capacitance / Frequency / Duty cycle
• 1 channel oscilloscope (1kHz / 5.0MSa/S sampling rate)

• 60ml container

Smart ultrasonic thickness meter that can measure thickness / sound speed of many types of materials such as metal, plastic, ceramic. Ideal for automotive applications to measure the thickness of piston heads. Supplied with ultrasonic gel. Additional gel available separately.

• Probe frequency: 2mHz
• Range: 2.0 - 225mm (steel)
• Resolution: 0.1mm
• 90cm cable length
• +/- (1%H+0.1)mm accuracy