A specialised tool to hold the cylinder head when disconnecting the timing chain. For engine 642 in type 204, 207, 212, 218 except code 927 - these engines require ET1613A, ET1613B and ET1613C.
- OEM equiv: 642 589 04 40 00 (642589044000)
642 589 04 40 00
Mercedes M642 Timing Kit
A comprehensive set of tools for aligning the camshaft angle to the correct position on Mercedes OM642 engines, and locking the crankshaft onto the starter ring gear. Includes a retaining tool for mounting the timing chain to the camshaft sprocket.
- Refer to PDS for engine / vehicle applications.
- OEM equiv: 111589031500 | 112589034000 | 642589003100 | 642589014000 | 642589044000
| SKU | ET1613C |
| Barcode # | 9321280423046 |
| Brand | Automotive |
| Vehicle Make | Mercedes |
12 Months
More from this category
Mercedes 36mm Viscous Fan Hub Nut Wrench
Specialised thin 36mm spanner for fan coupling nut servicing. Use with ET1022AD holding tool.
- Engine codes: M111 | M112 | M113 | M604
Mercedes A/C Idler Pulley Wrench
Special 2-in-1 design allows access to 8mm bolt on 102 | 103 idler pulley, and 10mm bolts on 116 | 117 V8 engines.
- Engine codes: M102 | M103 | M116 | M117
Mercedes Camshaft Adjuster
A specialised set of camshaft adjuster quadrants which are design to mark the correct position to align the camshaft on a range of high performance engines.
Use in conjunction with ET0611 cam hold down tools.
- Applications: M152 | M157 | M276 | M278
- OEM Equiv: 278589002300
Mercedes Camshaft Holding Tool
For locking the left intake camshaft when servicing the camshaft chain drive. Mount with threaded bolt on the cylinder head.
- Engines: M272 | M273
Mercedes Camshaft Socket M270 | M274
A specialised socket for turning the camshaft while servicing the engine / performing engine timing operations.
- Engines: M133 | M176 | M178 | M264 | M270 | M274
- OEM equiv: 270589010700
Mercedes Crankshaft Harmonic Pulley Holder
Holds vibration damper when loosening \ tightening the center bolt. For some models with dual pulleys / two belts, longer pins are needed to reach through the pulley. Please refer ET1266A.
- Dia: 26.9 x 3.25mm.
- Engine codes: M112 | M113 | M156 | M159 | M275
- Does not fit E55 Kompressor