Specialised tool for operating the engaging lever during servicing the mechatronic unit on 7 speed dual clutch gearboxes 0AM.

Removes load from the plungers of the mechatronic unit when inserting the tool between clutch lever and gear housing.

• Applications: Audi A3 (04-), EOS (06-), Passat (06-), Passat CC (09-), VW Golf (04-).
• OEM Equiv: T10407

The T10466 VAG tool is a specialised gauge designed for precise adjustment of clutch engagement bearings in Volkswagen and Audi vehicles equipped with 7-speed dual-clutch gearboxes.

• 7 speed DSG transmissions (specifically those with gearbox code 0AM) (>2011)

Manual type pressure tank to refill ATF on automatic transmissions without a dipstick. Includes 21 adapters for most common vehicles.

Tank with 6 litre / 1.5 gallon capacity, suitable for most transmissions - Audi, Ford, Holden, Mercedes, Nissan, Toyota, VW, and Volvo et c.

Specially designed tank base for feet to step on to stabilise the tank while pumping.

• Includes 21 adaptors

A specialised tool for removing the sensor module connector on 0B5 transmissions (7 speed DCT with wet clutch). To use, simply connect the socket to the housing, turn anti-clockwise, then remove the connector housing.

• Applications: 0B5 transmissions
• Vehicles: Audi A4 (08-) | A5 Cabriolet (09-) | Q5 (08-) | A5 Coupe (08-) | A5 Sportback (08-) | A7 Sportback (11-)
• OEM Equiv: T40228

Developed to remove and install the clutch cover with the sealing ring on the shaft, ensuring accurate alignment and a secure fit.

• Suitable for use with various BMW models, including the 2008-2014 M3, 135i, 335iS, F10 M5, and F12/3 M6 equipped with DCT transmissions

The ET1566A Clutch Installer is a specialised tool designed for the removal and installation of dual clutches, specifically engineered to be equivalent to OEM code 230400. This tool is essential for automotive professionals working with BMW GS7D36SG (DKG) transmissions.

• OEM Equiv: 23 0 400 (230400)

The ET1566C DCT Output Shaft Seal Tool is an essential tool for automotive professionals working with dual-clutch transmissions (DCT). This tool is specifically designed to facilitate the installation of the output shaft seal, ensuring a precise and secure fit

• Suitable for use with various BMW models, including the 2011-2014 135i, 335iS, F10 M5, and F12/3 M6 equipped with DCT transmissions

For GA6HP19Z / GA6 HP19Z / GA6L45R gearboxes.

• E90, E91, E92, E93, E70, F20, F21, F22, F23 models, with N51, N52, N55, M57 engines
• OEM Equiv: 241370 | 83300495486

A specialised clutch alignment tool for installing new clutches in manual transmissions on BMW Mini vehicles.

Designed for use on SAC type clutches where larger tapered tools will not fit.

• Applications: Mini Cooper JCW/S (11-15) | JCW ALL4/S (11-16)
• Engines: N18 (1.6L petrol) | N47 (1.6L / 2.0L diesel) with Getrag 6 speed gearbox & SAC type clutch
• OEM Equiv: 210000 | 83300496779)