A 105mm 8-point axle nut socket commonly used to install the rear axle nut on Hino 11.9T truck axles.

• 105mm diameter
• 8 Point socket
• 1" Sq Drv

Professional quality belt sanders, with JAPANESE bearings for smoother operation / extended life.

• Lightweight composite body tools.
• With safety lever
• Belt size: 10mm x 330mm

The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

>Black Snake random orbital sanders with Central Vacuum system are engineered for high-efficiency surface preparation and ultra-smooth finishing.

Designed for professional environments requiring dust controlled operations, these sanders combine powerful performance with excellent dust extraction capability.

• Central vacuum
• 2.5mm fine orbit action
• 3" low profile pad, perfect for spot repair, edge work and tight area sanding
• Air Consumption: 3.0 CFM
• RPM: 12,000
• 1/4" air inlet

Air Boy thrust guns provide a very high air flow, and offer a safe solution, as the nozzle is unblockable. The thrust nozzle increases airflow by 100% due to the venturi principle.

Air Boy thrust guns have a wide range of cleaning applications in commercial vehicles, trade and industry.

• Max 12 bar pressure
• 600 litres / min @ 8 Bar
• 98.2 dB @ 8 Bar

This impact socket is part of Endeavour's specialty range of 1" Sq Drv 6 point thin wall impact sockets designed for truck servicing. Sizes cover an extensive range from 70mm through to 200mm.

• 115mm diameter
• 6 point
• 1" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 2-9/16" (65mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 3-1/4" (83mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered 8 point nuts on truck wheel bearing locknuts. Use with extension / torque wrench.

• 3-1/4" (83mm) opening | 8 Point
• 98mm overall length
• 3/4" Sq Drv

A 105mm 8-point axle nut socket commonly used to install the rear axle nut on Hino 11.9T truck axles.

• 105mm diameter
• 8 Point socket
• 1" Sq Drv