A 115mm 8-point axle nut socket commonly used to dismantle and replace the front end and rear wheel axle covers on Volvo trucks.

• 115mm diameter
• 8 Point socket
• 1" Sq Drv

A 110mm 8-point axle nut socket commonly used on a range of Japanese and Asian heavy-duty trucks and buses for maintenance and repair of wheel-end components, especially for hub and bearing removal. Specific application for BPW 16T trailer axle caps.

• 110mm diameter
• 8 Point socket
• 1" Sq Drv

A 90mm 8-point axle nut socket commonly used on a range of Japanese and Asian heavy-duty trucks and buses for maintenance and repair of wheel-end components, especially for hub and bearing removal.

• 90mm diameter
• 8 Point socket
• 1" Sq Drv

An 85mm 8-point axle nut socket commonly used on rear wheel axle nuts (differential / drive axles) on Mercedes, MAN, Kenworth trucks.

• 85mm diameter
• 8 Point socket
• 1" Sq Drv

A 105mm 8 point axle nut socket commonly used to install the rear axle nut on Hino 11.9T truck axles.

• 105mm diameter
• 8 Point socket
• 3/4" Sq Drv

• 14 locking socket clips
• Magnetic base
• 1/4" Sq Drv

A stable power supply is essential when flashing / reprogramming / calibrating ADAS. This unit outputs 100A indefinitely, with variable voltage. Plus functions as a 60A battery charger.

Based in Kansas USA, Clore has a 50 year heritage in developing battery technology for automotive professionals.

• 100A battery stabiliser
• 13.1V - 14.9V (0.1V increments)
• 60A / 40A / 10A battery charging modes
• Extremely low peak to peak ripple voltage
• Adjustable voltage output 13.1~14.9v
• 7-phase battery charging sequence. 60A / 40A/ 10A modes
• No voltage drop
• Quick response time 8x faster than competing models
• Clean, stable power perfect for reprogramming
• 13 Ft Cables
• Winner of Motor Magazine Top 20 Tools award 2020

This impact socket is part of Endeavour's specialty range of 1" Sq Drv 6 point thin wall impact sockets designed for truck servicing. Sizes cover an extensive range from 70mm through to 200mm.

• 115mm diameter
• 6 point
• 1" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 2-9/16" (65mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 3-1/4" (83mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered 8 point nuts on truck wheel bearing locknuts. Use with extension / torque wrench.

• 3-1/4" (83mm) opening | 8 Point
• 98mm overall length
• 3/4" Sq Drv

A 115mm 8-point axle nut socket commonly used to dismantle and replace the front end and rear wheel axle covers on Volvo trucks.

• 115mm diameter
• 8 Point socket
• 1" Sq Drv