BMW Diesel Injection Pump Remover

M47 | M47TU | M57 | M57TU
SKU: ET1441

Automotive


Retains the pump sprocket in position when the VP44 high pressure common rail pump is removed, as the pump sprocket & timing chain remains undisturbed reducing engine disassembly time. Used for inline engines 1.8L | 2.0L | 3.0L BMW diesel engines. ALSO used on Land Rover, FreelanderTD4, Rover 75 2.0L D M47R.

  • Applications: most 4 Cyl | 6 Cyl diesels from 1998 - 2007
  • Engines: M47 (puller only) | M47TU (puller & centring bush) | M57 (puller & centring bush) | M57TU (puller & centring bush)
  • M40 x 1.5mm | M42 x 1.5mm centring bush
  • M30 thread

13 5 190

13 5 191

13 5 192

12-178

SKU Description OEM Equivalent Codes
TT5190

BMW Injection Pump Extractor

13 5 190

TT5191

Injection Pump Puller

13 5 191

TT5192

Injection Pump Shaft Tool

13 5 192

Engine Code(s)

M47D20, M47TUD20, M57TUD30, M57D30, M57D25, M57TU2D30

Vehicle Make Model Series Engine Code Engine Size Year Start Year End
BMW320DE46M47D202.0L19992005
BMW320DE91M47D202.0L20042007
BMW320DE90M47D202.0L20042007
BMW520DE60M47D202.0L20052007
Land RoverFreelanderM47D202.0L20002007
BMW525DE60M57D252.5L20032007
BMW325DE90M57D303.0L20082010
BMW330DE46M57D303.0L19992001
BMW330DE46M57D303.0L20022005
BMW330DE90M57D303.0L20042008
BMW330DE91M57D303.0L20052008
BMW335DE90M57D303.0L20052010
BMW525DE61M57D303.0L20052010
BMW525DE60M57D303.0L20062009
BMW530DE39M57D303.0L19982003
BMW530DE60M57D303.0L20082010
BMW535DE60M57D303.0L20042009
BMW535DE61M57D303.0L20042010
BMW730DE65M57D303.0L20042008
BMWX5E53M57D303.0L20002003
BMW730LDE66M57TU2D303.0L20052008
BMWX3E83M57TU2D303.0L20062010
BMWX5E70M57TU2D303.0L20072010
BMWX6E71M57TU2D303.0L20082010
BMW530DE60M57TUD303.0L20022008
BMW730LDE66M57TUD303.0L20052008
BMWX3E83M57TUD303.0L20052011
BMWX5E70M57TUD303.0L20042010
BMWX6E71M57TUD303.0L20082010
SKU ET1441
Barcode # 9321280327917
Brand Automotive
Vehicle Make BMW

12 Months

Calculate Shipping



Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products


Others also bought


Promo
Injector Seal Removal / Installation Tool

Injector Seal Removal / Installation Tool

Injector blowback is a common problem with diesel engines. To remedy this, either a new copper washer needs to be fitted and / or the injector seat needs to be gently refaced before installing a new copper washer.

This tool is designed to easily remove / install copper washers in deep seated injectors.

To remove / install a copper washer, the protrusion of the split collet should be set according to the thickness of the seal to be removed / installed.

  • 7mm ID | 230mm reach
  • For deep seated injector seals