An extra heavy duty puller for disassembling even the most seized U joints in minutes on virtually all heavy duty commercial vehicles.

This puller is engineered to be used with 1" Sq Drv impact tools. Reduces the risk of damage to driveshafts, yokes, joints and bearing cups.

To use, simply remove all bolts from the bearing cup. Slide the puller over the drive line yoke. Turn forcing screw clockwise with impact wrench.

• Application: U-Joints with bearing cups 1-1/2" - 2.2" OD.
• Ensure forcing screw is always lubricated.

Convert your Android scan tool into a professional battery tester! Or use with your mobile phone / tablet. Easily send test reports by email.

• Works with all common automotive batteries including AGM / GEL / Lithium.
• Professional tester showing battery status, charging / cranking tests, and voltage monitoring for deep analysis.

A stable power supply is essential when flashing / reprogramming / calibrating ADAS. This unit outputs 120A indefinitely, with variable voltage. Plus functions as a 120A battery charger.

IMPORTANT SAFETY NOTICE: This unit must be connected to a 15A circuit. The power cord supplied with the ET6102 must be used with this unit. This 15A cord has a larger earth pin.

Grinding down the earth pin to suit a standard 10A outlet or using an alternative cable with a 10A plug will damage the unit and void the warranty.

Based in Kansas USA, Clore has a 50 year heritage in developing battery technology for automotive professionals.

• 120A battery stabiliser
• 12 / 24V operation
• 120A / 40A / 10A battery charging modes
• 13ft Cables
• 120A Max Output For Both Car / Truck Applications
• Extremely Low Peak To Peak Ripple Voltage
• Adjustable Voltage Output
• 7-Phase Battery Charging Sequence
• No Voltage Drop
• Lead Acid Plus Lifep04 Batteries

The ET6344A is a specialised time saving tool for removing and installing diesel injector sleeves on Fuso 6M60 engines.

• Engine code: 6M60
• OE sleeve: ME302359

Designed specifically for removing and installing injector sleeves from Hino's N04C diesel engine, commonly found in light-duty trucks like the Hino Dutro and Toyota Dyna.

This tool ensures safe and efficient removal without damaging the cylinder head or sleeve bore.

• Engine code: N04C
• Injector sleeve: S1117-61200

The ET1891A Volvo Fuel Injector Nozzle Cut Sleeve Tool is designed for the removal and installation of fuel injector nozzle cut sleeves in Volvo and Mack diesel engines. This tool ensures a seamless process, reducing the risk of damage to the injector sleeve and surrounding components.

• OEM Compatibility - Designed to work with OEM: 88800513 | 88880211 | 88880212, ensuring a perfect fit for Volvo (D11 | D13 | D16) and Mack (MP7 | MP8) engines
• Improved Installation - Specifically crafted for stainless steel sleeves, including 85137065 and 21515329

ET1393E is a Volvo / Mack truck injector sleeve tool with an improved push-through design. This specialised tool works on both brass and stainless steel cups.

• Applications: Mack MP7 | MP8 | MP9 | MP10, Volvo FM | FM12
• OEM equiv: 88800387 | 88800513 | 9986174

The ET1393G-04 Volvo D7 Injector Sleeve Remover is a specialised tool for efficiently removing injector sleeves from the cylinder head of Volvo D7 engines. This tool ensures a precise and hassle-free extraction process, making it an essential addition for mechanics working on construction equipment, freight, and sea transport vehicles powered by Volvo D7 engines.

• Precision Removal - Designed specifically for Volvo D7 injector sleeves, ensuring accurate extraction.
• Wide Compatibility - Also applicable for Deutz TCD 2013 L4, TCD 2013 L6, TCD 4.1 L4, TCD 6.1 L6, and TCD 7.8 L6 engines
• OEM Equiv: 88800198

An essential time saving tool for removing / installing the diesel injector sleeve on Volvo FM12 trucks.

This kit contains three tools: a tool for tapping the injector sleeve head, a tool for removing the injector sleeve, and a tool for injecting the new sleeve.

• Application: FM12 trucks
• Use in conjunction with ET1350B