This kit helps clean / decarbonise the injector hole. Plus the seat cutters clean the bottom of the injector hole to allow proper setting of the new copper washer.

Helps avoid blow back due to poorly seated injectors.

• 3 seat cutters: 17mm flat | 17mm angled | 21mm angled
• Includes washer removal tool, injector blanking plugs (stop debris entering cylinders), wire brush cleaning set for chamber walls and centralising stem for correct cleaning seating angle

A high quality kit of left handed drills. These are ideal for use for screw removal as the left handed motion can help loosen stuck screws.

European made quality for professional use.

• 2, 3, 4, 5, 6, 8mm

The PPPWM is an adapter that is plugged into Power Probe circuit testers with 4mm banana plugs (such as THE MAESTRO / PP4 / PP3 / PP3EZ etc).

The adapter can be set for the output 0-100% pulse width drive waveform by pressing the key. Ideal for automotive applications such as automotive fan circuit detection, to find the part of the circuit failure, in order to replace and repair.

Duty cycle adjustable 5% - 100%.

For 12V / 24V use. 10A max continuous output.

The Izar Screw Extractor Kit is a professional-grade 'easy out' extractor and bit set, designed for fast screw removal and fastening tasks. Ideal for mechanics, technicians, and industrial users, this 17-piece set combines durability, versatility, and precision in one compact kit.

• 4 x easy out impact extractors 12 x PH | PZ | TX bits.
• N° 1 3-5mm
• N° 2 4-8mm
• N° 3 5-10mm
• N° 4 6-12mm not suitable for impact
• Made in Spain

Special tools for internal repair of Bosch | Siemens | Denso CR injectors. These tools are designed to remover the injector's internal fittings, and include injector ball valve lapping tools and guide.

• Injector ball valve lapping tools & guide (3x)
• 10mm Hex Male x 6.6mm dia Hole Security Insert x 21mm external Hex 1/2" Sq Drv
• 10mm Hex Male x 7.6mm dia Hole Security Insert x 21mm external Hex 1/2" Sq Drv
• Denso CR injector valve seat removal tool
• Bosch CR 16mm injector screw removal socket (8 sided) 1/2" Sq Drv
• Siemens CR injector internal fixing removal tool

This return fuel volume tester is for use on the injector return side of a common rail diesel system. Very easy to use - simply take off the return pipe connectors on the injectors and substitute with the fuel lines from this test kit.

• Measure return fuel flow on common rail injectors
• Identify worn / blocked / inoperative injectors quickly
• For diesel vehicles up to 6 cylinders
• Adaptors for Bosch | Siemens | Denso | Delphi

This practical tool helps test diesel injectors for leakage, spray patterns, opening pressure, and leakage between injector needle and injector body.

Suitable for pressure-activated injectors. An electronic switching device (ET6632) is needed for this unit to be able to test common rail type injectors.

• With transparent tank and two connecting pipes - M12 | M14
• Pressure range: 0-600 Bar (0-8700 PSI)

This socket set is specially designed for removing diesel injectors, including new style sockets for late model engines including Duratorq on Ford Mondeo / Transit, and those used on late model Land Rovers.

Professional quality chrome moly sockets.

• 1/2" Sq Drv: 21 x 89mm | 22 x 78mm | 22 x 110mm | 27 x 78mm | 28 x 78mm | 28 x 83mm
• The 28mm socket features a location collar for 2.4D | 2.5D engines on Alfa Romeo / Land Rover.

These tools are essential for holding the injectors in place on Ford Puma engines when tightening the high pressure fuel pipe and injector collar.

This set includes one alignment bar to align two injectors simultaneously, and a second adjustable bar to extend functionality to include 2.0L | 2.2L | 2.4L diesel engines.

When working on diesel fuel systems, it is important to avoid allowing dirt to enter the fuel system. These plugs seal off the fuel rail, and also allow individual injectors to be blanked off to allow diagnosis of fuel system pressure loss.

• Internal thread sizes: M12 x 1.5mm (6 pcs) | M14 x 1.5mm (6 pcs)
• Applications: Bosch | Denso | Delphi | Siemens injectors
• Fits most common rail injection rail sizes.