To remove camshaft chain tension on BMW 2.5L TDS engines, position tool inside the cam timing chain cover and lever against the chain bow to press in the chain tensioner.
- Applications: Land Rover Range Rover 2.5DT/SE
Engine Code(s)
M51D25
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Land Rover | Range Rover | M51D25 | 2.5L | 1994 | 2002 |
Engine Code(s)
M51D25
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Land Rover | Range Rover | M51D25 | 2.5L | 1994 | 2002 |
| SKU | ET1262C |
| Barcode # | 9321280351820 |
| Brand | Automotive |
| Vehicle Make | JLR |
12 Months
More from this category
Crankshaft Front Oil Seal Tool | Ford Ranger
Required tools when replacing the crank seal / removing front engine cover to replace the chain. For use on 2.0L | 2.2L | 2.4L | 3.2L TDCi / TDDi Duratorq engines fitted to Ford Transit | Ford Ranger plus Jaguar X Type X400 and Land Rover Defender.
- First component removes diesel pump sprocket cover, and also allows oil seal to be removed / replaced.
- Second component aligns / centralises the front camshaft chain cover before fitting the new oil seal.
Ford / JLR Oil Pump Alignment Tool
Oil pump locking tool for 2.0L, 2.2L, 2.4L, 3.2L diesel engines and 2.3L Duratec petrol engines.
Allows the oil pump to be removed / replaced in the same position (to ensure that the oil pump is not operating with excessive side loads).
- Mondeo | Ranger | Transit (2.0 / 2.2 / 2.4 / 3.2 TDCi / TDDi / Di Duratorq)
- OEM Equiv: 303-705 | 303-1093 (PSA 0198H)
Ford 2.2L Diesel Balance Shaft Locking Kit
A specialised kit for holding / locking balance shafts fitted to the 2.2L DOHC diesel engines in JLR / Citroen vehicles.
- Applications: Land Rover Discovery Sport | Freelander 2, Mitsubishi Outlander, Citroen C5, Ford Mondeo
- Engines: 244DT | 4HK / 4HL / 4HN / 4HP / 4HR / 4HS / 4HT / 4HW / 4HX / 4HZ | KNBA | KNBB | KNWA | Q4BA, DW12BTED4 / DW12CTED4 / DW12MTED4
JLR 2.0L Diesel Rear Crankshaft Install Kit
This kit has been designed to quickly / safely fit the rear crankshaft oil seal on JLR 2.0L diesel Ingenium engines.
- Engine code: AJ200
- Applications: E-Pace (from 2017) | F-Pace (2016-2020) | XE (2015-2020) | XF (2015-2020), Land Rover Discovery (from 2017) | Discovery Sport (2015-2019) | Range Rover Sport (2016-2018) | Range Rover Velar (from 2017)
JLR 2.5 TDS Injection Pump Puller
Retains the pump sprocket in position when diesel pump is removed, as the pump sprocket & timing chain remains undisturbed reducing engine disassembly time. Use for 2.5L TDS transverse mounted engines in BMW (E34 | E36 | E38) 1.7L & 2.5L / Holden / Land Rover TD5. Always lubricate forcing screw.
- OEM Equiv: 13 5 120 (135120) | KM-825
JLR 2.7L | 3.0L Crankshaft Trigger Wheel Tool
An essential tool for installing the crankshaft position sensor ring on JLR vehicles fitted with the TDV6 engine, and also the trigger wheel to the rear crankshaft of Jaguar engines (300 powertrain).
- Applications: Land Rover Discovery 3 & 4 | Range Rover Sport, Jaguar X200 S Type | X250 XF | X350 XJ | X351 XJ, Ford Territory
- Engines: 2.7L | 3.0L TDV6 diesel
- OEM Equiv: 303-1130