Prevents camshaft pulley from rotating, allowing extraction of central fixing screw on Impreza WRX with 2L turbo (02-05). Not suitable for turbos with Variable Cam Timing. Install central screw to 30Nm torque, then tighten 45 degrees.
- Size: 12pt 69mm point to point
- Cut outs: 5 x 7mm
- Outside diameter: 98mm
- Overall length: 470mm
- Applications: Impreza 1600cc | 1800cc | 2000cc
499207400A
| SKU | ET1202 |
| Barcode # | 9321280328433 |
| Brand | Automotive |
| Product weight | 1.1900kg |
| Shipping weight | 1.190000kg |
| Vehicle Make | Subaru |
12 Months
Others also bought
Truck Air Brake Adjusting K
A specially designed kit for adjusting automatic slack adjusters found on Meritor brake systems. Contains a fork shaped tool for hands free release of the brake tensioner button. The reversible ratchet ring spanner is for adjusting the brake adjuster clearance.
- Steel fork release tool
- 5/16" double square (8 Point) offset ratcheting spanner
- Use in accordance with manufactures's instructions
More from this category
Land Rover Injection Pump R
Forcing screws and bolt to remove the fuel injection pump. Use with 303-249-01 & 303-1049 (ET1013L).
- Application: Land Rover Defender (07MY)
Subaru 2.5L | 3.6L Camshaft
Holds camshaft sprockets on 2005 and newer Subaru models with 2.5L Turbo and 3.6L 6 cylinder engines with variable gears.
Some 2.5L engines may require the ET1202 as well.
- Dimensions: 31.7mm * 28mm * 7mm
- Overall length: 475mm
Subaru 2.5L Crankshaft Pull
Specially designed holder for the LEGACY 2.5L & FORESTER to remove & replace the camshaft pulley on the vehicle without taking out the radiator.
This holding tool must be used in conjunction with a torque wrench.
- 12mm pin dia | 64mm PCD
- 42mm ID | 90mm OD
- Overall length: 680mm
Subaru Cam Sprocket Holding
Suits Liberty 2.0L EJ22 engine & V7 & V8 EJ207 engines with intake AVCS. Intake cams only.
Allows for the removal of the AVCS intake cam sprockets without damaging the cam or the sprocket.
- 3 pin circle
- 104mm head diameter
- Overall length: 700mm
Subaru Cam Sprocket Tool
Wrench holds the pulley from rotating, then allows the central fixed screw (SOHC cam sprocket) to be extracted. ALSO suits Saab 9-2X linear SOHC engine (05-06) & Baja SOHC engine (04-06)
- Suits Legacy 2200cc engines
- Engine code: EJ22
Subaru Cam Sprocket Wrench
An essential wrench for holding the camshaft pulley when replacing / installing the timing belt. This wrench has two special internal curves for holding the pulley.
This special design will not round out the internal pulley spline.
- Application: Impreza WRX STI (08-)(exhaust cams only)
- OEM Equiv: 499977500