Ford Crankshaft Damper Holding Tool

2.3L | 2.5L
SKU: ET1196A

Automotive


For removing / installing the crankshaft bolt. The holding tool prevents the pulley from rotating when extracting the central fixed screw.

  • Ford Escape 2.3L

Engine Code(s)

L3

Vehicle Make Model Series Engine Code Engine Size Year Start Year End
FordEscapeZBL32.3L20042006
FordEscapeZCL32.3L20062008
MazdaTributeCUL32.3L20042006
MazdaTribute5ZL32.3L20062008
MazdaCX-7ERL3VDT2.3L20062012
MazdaAtenzaGGL3VDT2.3L20062009
MazdaAxelaBKL3VDT2.3L20062009
MazdaAxelaBLL3VDT2.3L2009
Mazda3BKL3VDT2.3L20092014
Mazda3BLL3VDT2.3L20092014
Mazda6GGL3VDT2.3L20052008
MazdaMPVLYL3VDT2.3L2006
MazdaAtenzaGGL3VE2.3L20052007
MazdaAxelaBKL3VE2.3L20062009
Mazda3BKL3VE2.3L20032009
Mazda6GGL3VE2.3L20052008
MazdaMPVLYL3VE2.3L2006

303-1416

Engine Code(s)

L3

Vehicle Make Model Series Engine Code Engine Size Year Start Year End
FordEscapeZBL32.3L20042006
FordEscapeZCL32.3L20062008
MazdaTributeCUL32.3L20042006
MazdaTribute5ZL32.3L20062008
MazdaCX-7ERL3VDT2.3L20062012
MazdaAtenzaGGL3VDT2.3L20062009
MazdaAxelaBKL3VDT2.3L20062009
MazdaAxelaBLL3VDT2.3L2009
Mazda3BKL3VDT2.3L20092014
Mazda3BLL3VDT2.3L20092014
Mazda6GGL3VDT2.3L20052008
MazdaMPVLYL3VDT2.3L2006
MazdaAtenzaGGL3VE2.3L20052007
MazdaAxelaBKL3VE2.3L20062009
Mazda3BKL3VE2.3L20032009
Mazda6GGL3VE2.3L20052008
MazdaMPVLYL3VE2.3L2006
SKU ET1196A
Barcode # 9321280329010
Brand Automotive
Product weight 3.7500kg
Shipping weight 3.750000kg
Vehicle Make Ford

12 Months


More from this category


Camshaft Locking Tool

Camshaft Locking Tool

Locks camshafts in their timed position, when there is a need to remove the variable valve timing pulleys.

Use with ET0512.

  • Applications: Ford Fiesta | Focus, Volvo V40 | S60 | V60
  • Engine codes: Ford HXDA | HXJA | JQMA | PNDA | U5JA, Volvo B4164T
  • OEM Equiv: 303-1552

Promo
Crankshaft Front Oil Seal Tool Crankshaft Front Oil Seal Tool

Crankshaft Front Oil Seal Tool

Required tools when replacing the crank seal / removing front engine cover to replace the chain. For use on 2.0L | 2.2L | 2.4L | 3.2L TDCi / TDDi Duratorq engines fitted to Ford Transit | Ford Ranger plus Jaguar X Type X400 and Land Rover Defender.

  • First component removes diesel pump sprocket cover, and also allows oil seal to be removed / replaced.
  • Second component aligns / centralises the front camshaft chain cover before fitting the new oil seal.

Crankshaft Locking Tool

Crankshaft Locking Tool

For 4 Cyl Pumpe Duse diesel engines (1.9L | 2.0L engine with 2 & 4 valve) with arrow at 12 o'clock position with round sprockets. Also suited to FORD, SEAT & SKODA 1.9L TDi PD 3 & 4 cylinder engines.

Flywheel Locking Tool

Flywheel Locking Tool

SKU: ET0212

Flywheel Locking Tool

For 1.0L 3 Cyl EcoBoost GDTi engines.

  • OEM Equiv: 303-1602

Flywheel Locking Tool

Flywheel Locking Tool

SKU: ET1374

Flywheel Locking Tool

This set locks / holds the flywheel in position to allow the release of the crankshaft pulley screws during timing belt replacement. It has the same functions as ET1574 but with the extra locking adaptors expanding its use on a larger model group in the Ford petrol & diesel engine range.

  • Applications across a wide range of Ford engines especially: Diesel 1.8TDdi / TDCi 2.0TDCi, Petrol: 1.6Ti-VCT | later 1.25L / 1.4L 16v Duratec
  • Adaptor lengths: 11mm | 29mm | 42mm

Ford / JLR Oil Pump Alignment Tool

Ford / JLR Oil Pump Alignment Tool

Oil pump locking tool for 2.0L, 2.2L, 2.4L, 3.2L diesel engines and 2.3L Duratec petrol engines.

Allows the oil pump to be removed / replaced in the same position (to ensure that the oil pump is not operating with excessive side loads).

  • Mondeo | Ranger | Transit (2.0 / 2.2 / 2.4 / 3.2 TDCi / TDDi / Di Duratorq)
  • OEM Equiv: 303-705 | 303-1093 (PSA 0198H)