Adjustable jaw design makes these pliers ideal for removing quick connnect, snap and side & lock couplers, on a wide range of vehicles.

• Applications include: Alfa, Audi, BMW, Chrysler, Citroen, Fiat, GM, Lancia, Lexus, Mercedes, Opel, Peugeot, Renault, SEAT, Skoda, Toyota, VW etc

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

The Endeavour ET2024R is a compact, high-performance thermometer designed specifically for automotive and HVAC professionals. Featuring a 110mm foldable stainless steel probe, it delivers fast and accurate temperature readings across a wide range from -50¡C to 300¡C.

• Rechargeable Battery - say goodbye to button batteries with simple USB Type-C charging
• Fast checking of vent temperatures
• Large backlit display - easy to read in low-light environments
• IP65 waterproof

The DM300AUTO is much more than a complete True RMS Digital Multimeter. It also includes several other functions of great utility for professionals in the automotive sector, such as checking the status of fuse protection, providing out of spec reading alerts, detecting parasitic draw, guiding automotive tests, checking the correct charging process of the alternator and measuring possible cranking voltages in the supply circuit.

The TFT colour display and the user friendly menu make this instrument an indispensable tool for automotive professionals.

• Measures current Flowing through fuses without removing the fuse (up to 80A)
• Fuse Voltage drop testing
• Guided automotive test such as Cranking Voltage / Alternator Charging
• AC/DC Voltage measurements up to 1000V
• Current measurements up to 30A
• Measures resistance, continuity and diode testing
• Frequency and duty cycle for PWM signals

Ensure your vehicle's cooling system stays corrosion-free and efficient with the ET5676 Antifreeze pH Meter - a professional tool designed to accurately measure the pH level of antifreeze and coolant solutions.

With EV vehicles as coolant decays, the acidity can increase, causing corrosion within the cooling system. This tester allows for quick testing of the coolant PH.

• Most automotive coolants should have an acidity level greater than 7.5. Check manufacturer specifications for suitable PH range.
• Measuring range: 0.00 - 14.00 PH | Resolution: 0.01PH | Accuracy: /- 0.1PH
• Operating temperature: 0 - 50¡C (Auto temperature compensation: 0 - 50¡C)
3x LR44 batteries (included)

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 2-9/16" (65mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 3-1/4" (83mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered 8 point nuts on truck wheel bearing locknuts. Use with extension / torque wrench.

• 3-1/4" (83mm) opening | 8 Point
• 98mm overall length
• 3/4" Sq Drv

A specialised socket for removing the mounting bolts on the axle of Mercedes Actros vehicles.

• Torx Plus EPL #32
• 50mm overall length
• Chrome Moly construction

A specialised socket for removing the mounting bolts on the axle of Mercedes Actros vehicles.

• Torx Plus EPL #32
• 90mm overall length
• Chrome Moly construction

Adjustable two pin axle nut removal kit. Supplied with three different sizes of pins to suit a wide range of vehicles. This is a more flexible / durable solution for removing two hole hub nut sockets, than a dedicated socket with two pins.

• Pin diameters: 5.5mm | 6.8mm | 9mm
• Applications: Isuzu D-Max | Nissan Patrol GU | Colorado RG