Holding tool for crankshaft pulley bolts, to service fixings without losing crank position - flat handle for access to tight areas.
- Applications: Impreza 1800cc
- Engine code: EJ18
- 4 x 7mm dia pins | 75mm PCD
- Outside dia: 96mm
- Hole dia: 53.5mm
Engine Code(s)
EJ18
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Subaru | Impreza | GC | EJ18 | 1.8L | 1992 | 1997 |
| Subaru | Impreza | GF | EJ18 | 1.8L | 1992 | 2000 |
499977100
Engine Code(s)
EJ18
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Subaru | Impreza | GC | EJ18 | 1.8L | 1992 | 1997 |
| Subaru | Impreza | GF | EJ18 | 1.8L | 1992 | 2000 |
| SKU | ET1151 |
| Barcode # | 9321280328761 |
| Brand | Automotive |
| Product weight | 1.0700kg |
| Shipping weight | 1.070000kg |
| Vehicle Make | Subaru |
12 Months
Others also bought
LDV 2.0L Turbo Diesel Fuel Filter Wrench
An essential service tool for removing the fuel filter cartridge on various LDV vehicles and SAIC Maxus models.
According to manufacturer specifications the filter assembly must be replaced typically every 20K kms making this an essential workshop tool.
- 121mm diameter | 15 slots
- Applications: SC20M engine | D90 Pro, G10 Plus, G20, RV80, T60, T70, T90, V80, V90
- Suits OEM filter assembly: C00283549
More from this category
Land Rover Injection Pump Release Screw
Forcing screws and bolt to remove the fuel injection pump. Use with 303-249-01 & 303-1049 (ET1013L).
- Application: Land Rover Defender (07MY)
Subaru 2.5L | 3.6L Camshaft Sprocket Holder
Holds camshaft sprockets on 2005 and newer Subaru models with 2.5L Turbo and 3.6L 6 cylinder engines with variable gears.
Some 2.5L engines may require the ET1202 as well.
- Dimensions: 31.7mm * 28mm * 7mm
- Overall length: 475mm
Subaru 2.5L Crankshaft Pulley Holder
Specially designed holder for the LEGACY 2.5L & FORESTER to remove & replace the camshaft pulley on the vehicle without taking out the radiator.
This holding tool must be used in conjunction with a torque wrench.
- 12mm pin dia | 64mm PCD
- 42mm ID | 90mm OD
- Overall length: 680mm
Subaru Cam Sprocket Holding Tool
Suits Liberty 2.0L EJ22 engine & V7 & V8 EJ207 engines with intake AVCS. Intake cams only.
Allows for the removal of the AVCS intake cam sprockets without damaging the cam or the sprocket.
- 3 pin circle
- 104mm head diameter
- Overall length: 700mm
Subaru Cam Sprocket Tool
Wrench holds the pulley from rotating, then allows the central fixed screw (SOHC cam sprocket) to be extracted. ALSO suits Saab 9-2X linear SOHC engine (05-06) & Baja SOHC engine (04-06)
- Suits Legacy 2200cc engines
- Engine code: EJ22
Subaru Cam Sprocket Wrench
An essential wrench for holding the camshaft pulley when replacing / installing the timing belt. This wrench has two special internal curves for holding the pulley.
This special design will not round out the internal pulley spline.
- Application: Impreza WRX STI (08-)(exhaust cams only)
- OEM Equiv: 499977500