Universal puller set for front hubs on most vehicles (with 4 / 5 hole configurations). The kit includes a slide hammer and hydraulic ram (which works with any hydraulic pump).
- PCD range: 96 - 126mm
- 4 holes: Most Japanese vehicles
- 5 holes: Most European vehicles (and Holden)
| SKU | ET1095D |
| Barcode # | 9321280326903 |
| Brand | Automotive |
| Product weight | 27.0000kg |
| Shipping weight | 27.000000kg |
| Vehicle Make | Universal |
12 Months
Others also bought
Universal Suspension Split
Easily remove / install suspension struts whilst leaving the hub on vehicle. Universal design for use on most passenger cards and light commercial vehicles.
- 5 - 14mm maximum spread (reduces risk of damage to hubs)
- 17mm hex drive (use with hand tools only)
Air Boy Locking Rubber Tip
Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. 15mm diameter suits small pipes.
- Suitable for all Air Boy blow (and other) guns with an 8mm dia pipe.
- Actively locks onto the blow gun pipe.
- Non-marring rubber surface protects against scratching delicate surfaces.
Endeavour AUSDIAG App - Jap
Accurate VIN decoding & engine wiring diagrams for Australian delivered Japanese trucks.
Only available on the CanDo HD Pro Tab. This is a 12 monthly subscription.
- ACCURATE VIN DECODING for Australian delivered Japanese trucks.
- ENGINE WIRING DIAGRAMS for Australian delivered Japanese trucks.
- SOCKET LOCATIONS - Graphical display of connector information & location for most Japanese trucks.
- EASY TO USE LAYOUT - Consistent styling across all diagrams for ease of use
- INTERACTIVE FORMATTING - Easy zoom in / zoom out functionality, plus click on wires to highlight individual wires.
- INSTRUCTION MANUALS - Access proprietary guides for Isuzu, UD etc
Coverage:
- FUSO (2011 ~ 23)
- Models: CANTER / FIGHTER / ROSA / HEAVY (FP, FV, FS)
- Engine wiring: 4D34 Euro III / 4P10 Euro V / 6M60 Euro IV, V / OM457 Euro V
- HINO (2007 ~ 23)
- Models: 300 / 500
- Engine wiring: J05E / A05C / J05D / J08E / A09C / A09C with DCU
- ISUZU (2008 ~ 24)
- Models: N / F / FX / FY / GX / GIGA
- Engine wiring: 4JJ1 / 4HK1 / 6HK1 / 6SD1 / 6UZ1 / 6WG1
- Nissan UD (2011 ~ 24)
- Models: CONDOR / CRONER / QUON
- ENGINE WIRING / FUSE & RELAY / DIAG SOCKETS: GH7 / GH8TA / GH8E / GH8F / GH11
More from this category
Ford Hydraulic Power Steeri
Versatile disconnect tool for use on a range of Ford / JLR vehicles. Especially on 2.0L Duratec and 2.3L Duratec.
- OEM Equiv: 308-440
Gland Nut Wrench | Large
This wrench is designed to fit hydraulic cylinders on most farm / construction equipment. Adjustable to fit gland nuts from 2 - 6" dia pin to pin. Also reversible to fit 1/4" and 5/16" dia pinholes.
- Use with 3/4" sq drv ratchet / breaker bar
Gland Nut Wrench | Small
This wrench is designed to fit hydraulic cylinders on most farm / construction equipment. Adjustable to fit gland nuts from 1 - 3-3/4" dia pin to pin. Also reversible to fit 1/4" and 7/32" pinholes.
- Use with 1/2" sq drv ratchet / breaker bar
Hub Puller Slide Hammer
Pulls flange-type rear axles on most latest model passenger cars & light truck. Designed to fit axles with bolts & studs up to 5/8" TW10 DA.
Inner Tie Rod Tool
Replaces inner tie rods without requiring steering rack removal.
- 30 - 42mm capacity
Mini Portable Smart Press
Versatile on vehicle hand press for front ball joint on common vehicles including Ford AU-BA, Explorer, and Nissan D40 Navara | Pathfinder. Also independent rear suspension bushes on V series Commodore.
- Ford AU-BA11 ball joints - top and bottom
- Ford Explorer ball joints - bottom
- V - Series commodore independent rear suspension bushes