For new generation COMPACT impact wrenches.

All ESSENTIAL sizes, especially 15mm for Commodore harmonic balancers.

• 6 Point
• Chrome moly impact sockets
• Sizes: 13mm - 19mm, 21mm, 22mm, 24mm
• 1/2" Sq Drv

An essential tool for every mechanic! Quickly / safetly removes wires from connectors, avoiding damage to wires and connectors.

• Fork for ALDL connectors
• Flat blade to open
• Rectangular for pack-con terminals
• Prongs depress barbs on standard terminals

A workshop quality touch control ultrasonic cleaner. This larger size is ideal for cleaning manifolds as well as smaller parts. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 500 x 300 x 200mm
• Dual 33kHz (coarse) / 40kHz (intensive) frequency
• 600W ultrasonic power / 500W heating power
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer (1-99 minutes working time)
• Digital temperature setting (0-80 degrees C range)

A versatile heavy duty long handled riveter, suitable for alloy and stainless steel rivets - blind rivets / female nutcerts / male nutcerts.

• Stainless Rivets: To 6.4mm
• Nutcerts: To 12mm
• RivBolts: To 8mm

Professional one person brake and clutch bleeding. Simply connect the adaptor to the master cylinder, fill the container with brake fluid, and pump. No external power source is required.

• 2.8 litre capacity
• Supplied with 44mm adaptor (ETWH500BC-06) that suits many European (and BYD) vehicles
• Other adaptors available separately

Convert your Android scan tool into a professional battery tester! Or use with your mobile phone / tablet. Easily send test reports by email.

• Works with all common automotive batteries including AGM / GEL / Lithium.
• Professional tester showing battery status, charging / cranking tests, and voltage monitoring for deep analysis.

Versatile disconnect tool for use on a range of Ford / JLR vehicles. Especially on 2.0L Duratec and 2.3L Duratec.

• OEM Equiv: 308-440

This wrench is designed to fit hydraulic cylinders on most farm / construction equipment. Adjustable to fit gland nuts from 2 - 6" dia pin to pin. Also reversible to fit 1/4" and 5/16" dia pinholes.

• Use with 3/4" sq drv ratchet / breaker bar

This wrench is designed to fit hydraulic cylinders on most farm / construction equipment. Adjustable to fit gland nuts from 1 - 3-3/4" dia pin to pin. Also reversible to fit 1/4" and 7/32" pinholes.

• Use with 1/2" sq drv ratchet / breaker bar

Pulls flange-type rear axles on most latest model passenger cars & light truck. Designed to fit axles with bolts & studs up to 5/8" TW10 DA.

Versatile on vehicle hand press for front ball joint on common vehicles including Ford AU-BA, Explorer, and Nissan D40 Navara | Pathfinder. Also independent rear suspension bushes on V series Commodore.

• Ford AU-BA11 ball joints - top and bottom
• Ford Explorer ball joints - bottom
• V - Series commodore independent rear suspension bushes

Professional quality tool for the removal of pitman and idler arms on vehicles with linkage steerage systems. Made from drop forged, high quality alloy steel.

• 33mm opening
• 63mm pull