Holds the camshaft pulley while loosening or tightening pulley bolts. Designed for use on EJ20 | EJ25 engines (with either 6 Pt | 12 Pt sprockets) - WITHOUT variable timing.
- Application: Forester | Impreza | Legacy
- 69mm point to point
- 400mm OL
Engine Code(s)
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Subaru | Impreza | |||||
| Subaru | Legacy | |||||
| Subaru | Forester |
499207400
Engine Code(s)
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Subaru | Impreza | |||||
| Subaru | Legacy | |||||
| Subaru | Forester |
| SKU | ET1079-3 |
| Barcode # | 9321280322202 |
| Brand | Automotive |
| Product weight | 0.71kg |
| Shipping weight | 0.71kg |
| Vehicle Make | Subaru |
12 Months
Others also bought
Sound Meter
Designed for measuring sound levels. Especially useful measuring exhaust noise levels for roadworthy testing.
- Range: 35 - 130db
- Resolution: 0.1dB
- Accuracy: +/- 1.5dB @ 1kHz
- 9V battery included
More from this category
Land Rover Injection Pump Release Screw
Forcing screws and bolt to remove the fuel injection pump. Use with 303-249-01 & 303-1049 (ET1013L).
- Application: Land Rover Defender (07MY)
Subaru 2.5L | 3.6L Camshaft Sprocket Holder
Holds camshaft sprockets on 2005 and newer Subaru models with 2.5L Turbo and 3.6L 6 cylinder engines with variable gears.
Some 2.5L engines may require the ET1202 as well.
- Dimensions: 31.7mm * 28mm * 7mm
- Overall length: 475mm
Subaru 2.5L Crankshaft Pulley Holder
Specially designed holder for the LEGACY 2.5L & FORESTER to remove & replace the camshaft pulley on the vehicle without taking out the radiator.
This holding tool must be used in conjunction with a torque wrench.
- 12mm pin dia | 64mm PCD
- 42mm ID | 90mm OD
- Overall length: 680mm
Subaru Cam Sprocket Holding Tool
Suits Liberty 2.0L EJ22 engine & V7 & V8 EJ207 engines with intake AVCS. Intake cams only.
Allows for the removal of the AVCS intake cam sprockets without damaging the cam or the sprocket.
- 3 pin circle
- 104mm head diameter
- Overall length: 700mm
Subaru Cam Sprocket Tool
Wrench holds the pulley from rotating, then allows the central fixed screw (SOHC cam sprocket) to be extracted. ALSO suits Saab 9-2X linear SOHC engine (05-06) & Baja SOHC engine (04-06)
- Suits Legacy 2200cc engines
- Engine code: EJ22
Subaru Cam Sprocket Wrench
An essential wrench for holding the camshaft pulley when replacing / installing the timing belt. This wrench has two special internal curves for holding the pulley.
This special design will not round out the internal pulley spline.
- Application: Impreza WRX STI (08-)(exhaust cams only)
- OEM Equiv: 499977500