Specialised adaptor cap to connect to the cooling system expansion tank for leak pressure testing. This cap is suitable for late model Haval vehicles, including petrol engine and hybrid models.

• Applications: Haval H6 | H9 | Jolion
• M63 x P4.0

The ET2031B Universal Line Kit is a versatile, multi function diagnostic set designed for fast, secure connection to vehicle wiring during general engine testing and circuit evaluation. It enables quick probing, signal access, and component activation across a wide range of automotive systems, making it an essential tool for efficient fault finding and reliable electrical diagnostics.

This kit comes with a bonus multimeter - offering a comprehensive diagnostic solution.

• Dual-Function LED Testers - these two-way LED circuit testers allow for quick identification of power and ground signals, making fault-finding faster and more intuitive.
• Black & Red Multimeter Connector Leads - ensuring reliable connectivity for a wide range of diagnostic tasks.
• Round Terminal Adapters (Male & Female) to Banana Plug - male and female round terminal adapters connect seamlessly to standard banana plugs; ideal for interfacing with OEM wiring and connectors.
• Flat Blade Terminal Adapters (Male & Female) to Banana Plug - Includes flat blade terminal adapters for compatibility with common automotive spade connectors, improving versatility during testing.
• Variable Resistors with Banana Terminals - adjustable resistors allow technicians to simulate loads, test sensor circuits, and diagnose voltage dependent faults with confidence.
• Needle Style Piercing Probes - designed for clean, precise back-probing without damaging insulation; perfect for modern fine gauge wiring.
• Heavy Duty Alligator Clips - these rugged clips provide strong, secure connections to battery posts, chassis grounds, or test points, ensuring stable readings during diagnostic work.

Specialised adaptor cap to connect to the cooling system expansion tank for leak pressure testing. This cap is suitable for late model BYD vehicles, including hybrid and battery electric models.

• Applications: BYD Atto 3 | Dolphin | E6Y | Seal
• M33.6 x P3.0 internal thread

Specialised adaptor cap to connect to the cooling system expansion tank for leak pressure testing. This cap is suitable for late model Haval vehicles, including petrol engine and hybrid models.

• Applications: Haval H6 | H9 | Jolion
• M63 x P4.0

Radiator test caps for major Chinese car makes, including BYD, Chery, Geely, GWM, Haval, LDV, and MG. Made with high quality and sturdy nylon materials.

Caps connect with a pressure pump (not included - ET1039-1) for leak tests. Or connect to a vacuum tool (not included - ET1039-PURGE) for coolant refill.

The ET8626 is a professional battery and charging-system tester designed for fast, accurate assessment of all 12V automotive lead acid cranking batteries - including modern stop-start types, and for evaluating 12V and 24V alternator and starting system performance. This tester delivers clear, reliable diagnostics in seconds, and the built-in thermal printer allows you to produce instant test reports for customer records or workshop documentation.

• Compatible With All Major Battery Standards - accurately tests batteries across all common industry standards, ensuring reliable results whether you're working with automotive, commercial, marine, or deep cycle 12V batteries.
• High Load Voltage Testing for 12V & 24V Systems - maximum load voltage tests on both 12 volt and 24 volt electrical systems, making it suitable for cars, trucks, machinery, and mixed fleet applications.
• Built In Short Circuit & Reverse Polarity Protection - integrated safety features to prevent damage to the tester and the battery, even if connections are made incorrectly.
• Wide 100–2,000 CCA Testing Range - enabling accurate assessments of everything from small passenger batteries to heavy duty commercial units.

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar. This high pressure bleeder is compatible with electro-hydraulic braking systems that operate at a higher pressure than conventional systems.

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.
• Suitable for low viscosity brake fluids.
• Supplied with European adaptor.

A professional quality tester designed for late model vehicles fitted with 13 pin Euro type sockets fitted to the back of the vehicle.

This tester is designed for testing the vehicle side socket, not the trailer itself.

• Tests socket functionality on modern 13 pin Euro sockets. Can also test legacy 7 pin sockets (separate adaptor).
• CANbus compatible to also test 12V continuous / ignition live feeds and the reversing lights. Useful when diagnosing faults.
• Built in self test function on the tool.
• Supplied with 4m cable to allow the unit to be used while sitting in the vehicle.
• Powered by vehicle 12V power supply.

Achieve perfect torque every time with this versatile and reliable torque adapter. The ET1234 Torque Adapter is a precision tool designed to prevent over-tightening of delicate components, such as plastic and aluminum oil filter canisters and filters, and sump plugs etc. It converts any 3/8" drive ratchet or breaker bar into a 25 Nm torque wrench, ensuring accurate tightening to manufacturer specifications.

• Accurate Torque Control: Converts any 3/8" drive ratchet or breaker bar into a precise 25 Nm torque wrench. Protect components from damage caused by over tightening.
• Durable Construction: Built with high-quality materials to ensure long-lasting performance.
• User-Friendly Design: Simple to attach and use with a 3/8" drive tool.
• Not for use with impact / pneumatic tools.

The ET2602 is a high-performance digital clamp meter designed for precision electrical measurements in industrial, commercial, and residential environments. Engineered with True RMS technology, it ensures accurate readings even in the presence of distorted waveforms caused by non-linear loads.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• AC / DC Current & Voltage, Resistance, Capacitance, Frequency, Duty Cycle, temperature
• CAT III 600V rating

Time saving tool for testing electronic components actuated by a magnetic field. Positive / negative sensor. Batteries included.

Test devices like ignition coil, AC generator, EGR valve controller, relay & hall effect sensors etc.

• 2x AA Batteries included.