JLR Crankshaft Trigger Wheel Installer

2.7L V6
SKU: ET1026L

Automotive


An essential tool for installing the crankshaft position sensor ring on JLR vehicles fitted with the TDV6 engine, and also the trigger wheel to the rear crankshaft of Jaguar engines (300 powertrain).

  • Applications: Land Rover Discovery 3 & 4 | Range Rover Sport, Jaguar X200 S Type | X250 XF | X350 XJ | X351 XJ, Ford Territory
  • Engines: 2.7L TDV6 diesel
  • OEM Equiv: 303-1130

Engine Code(s)

276DT, ELD11, AJD27

Vehicle Make Model Series Engine Code Engine Size Year Start Year End
FordTerritorySZ276DT2.7L20112016
Land RoverDiscoverySeries 3276DT2.7L20052009
Land RoverDiscoverySeries 4276DT2.7L20092012
JaguarS TypeX200AJD272.7L20062008
JaguarXFX250AJD272.7L20082009
Range RoverSportELD112.7L20052009
JaguarXJ6X350ELD112.7L20052009

303-1130

Engine Code(s)

276DT, ELD11, AJD27

Vehicle Make Model Series Engine Code Engine Size Year Start Year End
FordTerritorySZ276DT2.7L20112016
Land RoverDiscoverySeries 3276DT2.7L20052009
Land RoverDiscoverySeries 4276DT2.7L20092012
JaguarS TypeX200AJD272.7L20062008
JaguarXFX250AJD272.7L20082009
Range RoverSportELD112.7L20052009
JaguarXJ6X350ELD112.7L20052009
SKU ET1026L
Barcode # 9321280411777
Brand Automotive
Product weight 2.6000kg
Shipping weight 2.600000kg
Vehicle Make Ford
Vehicle Make JLR

12 Months


More from this category


Crankshaft Front Oil Seal Tool Crankshaft Front Oil Seal Tool

Crankshaft Front Oil Seal Tool

Required tools when replacing the crank seal / removing front engine cover to replace the chain. For use on 2.0L | 2.2L | 2.4L | 3.2L TDCi / TDDi Duratorq engines fitted to Ford Transit | Ford Ranger plus Jaguar X Type X400 and Land Rover Defender.

  • First component removes diesel pump sprocket cover, and also allows oil seal to be removed / replaced.
  • Second component aligns / centralises the front camshaft chain cover before fitting the new oil seal.

Ford / JLR Oil Pump Alignment Tool

Ford / JLR Oil Pump Alignment Tool

Oil pump locking tool for 2.0L, 2.2L, 2.4L, 3.2L diesel engines and 2.3L Duratec petrol engines.

Allows the oil pump to be removed / replaced in the same position (to ensure that the oil pump is not operating with excessive side loads).

  • Mondeo | Ranger | Transit (2.0 / 2.2 / 2.4 / 3.2 TDCi / TDDi / Di Duratorq)
  • OEM Equiv: 303-705 | 303-1093 (PSA 0198H)

Ford Balance Shaft Locking Kit

Ford Balance Shaft Locking Kit

A specialised kit for holding / locking balance shafts fitted to the 2.2L DOHC diesel engines in JLR / Citroen vehicles.

  • Land Rover Discovery Sport | Freelander 2
  • Citroen C5

Injection Pump Puller

Injection Pump Puller

Retains the pump sprocket in position when diesel pump is removed, as the pump sprocket & timing chain remains undisturbed reducing engine disassembly time. Use for 2.5L TDS transverse mounted engines in BMW (E34 | E36 | E38) 1.7L & 2.5L / Holden / Land Rover TD5. Always lubricate forcing screw.

  • OEM Equiv: 13 5 120 (135120) | KM-825

JLR Camshaft Pulley Locking Tool

JLR Camshaft Pulley Locking Tool

Camshaft locking tool for KV6 engines, as fitted to Land Rover Freelander, and some other Rover / MG engines.

  • Application: 2.5L V6 KV6

JLR Crankshaft Holding Kit

JLR Crankshaft Holding Kit

This kit comprises a specialised tool to hold the crankshaft pulley while installing / removing the crankshaft bolt on late model (2010 onwards) 3.0L | 5.0L engines, plus a deep socket for the crankshaft front pulley bolt.

  • Engine codes: AJ126 | 306PS | 508PN | 508PS