Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks. Simply pressurise using shop air.

The maximum pressure in most turbo systems is approximately 15 PSI - 25 PSI. When connecting the airline to these test caps, always regulate air pressure in the test to 25 PSI maximum. Over pressurisation will damage system components.

A graduated approach to leak testing is recommended. Start with 5 PSI to find large leaks, and progressively increase in 5 PSI increments.

• Kit includes 4 pairs of stepped adaptors to fit most sizes found on passenger vehicles.
• Includes pressure gauge, shut off valve, and pressure release valve.
• Adaptor sizes: 35-90mm

All-in-one driver box to test all petrol injectors including the latest GDI Piezo injectors. Plus diesel injectors.

Ideal for bench testing injectors to see if they are opening correctly. Also use in conjunction with ultrasonic cleaners to better clean internal parts, or with injector nozzle tester to test spray pattern.

• Automatically detects injector type
• From 1Hz to 20Hz adjustable
• Supplied with 6 adaptors to connect to a fuel rail of a traditional petrol PFI injector tester
• Signal output cords for both petrol / diesel injectors
• Powered by 240V adaptor (not shown)

Fuel Filter Remover designed specifically for the 2.0 Diesel variants of GWM and Haval vehicles.

• Engine code: GW4D20
• Application: GWM Cannon 2.0L Turbo Diesel
• For OEM filter: 1111402XED95

A specialised tool for adjusting camshaft spur belts which have idler pulleys with pin holes. The pin is designed to grip the centre of the idler pulley and rotate it around its off centre retaining bolt.

Applicable to a range of vehicles including Hyundai | Mitsubishi | Volvo.

• 1/4" Sq Drv
• Pin diameter: 3/16" (3.0mm)
• OEM Equiv: 09244-28000 | MD998767 (T40009)

Specialised 32mm spanner for viscous fan removal. Suits BMW | Land Rover 2.5 TDi / 300 Tdi. Use with ET1022AB holding tool.

• 380mm overall length

Used to lock the flywheel in place on a range of late model engines, as well as releasing / tightening down bolts on the vibration damper.

Use in conjunction with ET1517A

• Applications: M47T2 | M47TU | M57T2 | M57TU | M67 | N45 | N45T | N46 | N46T | N51 | N52 | N53 | N54 | W17
• OEM Equiv: 11 8 180 | 11 8 182 | 11 8 183

A specialised crankshaft oil seal installer for the front lower timing case cover to prevent damage when installing new oil seals on BMW B37 / B38 engines.

• Engines: B37C | B38A | B38B
• Applications: BMW 1 | 2 | 3 | X1 | X2, BMW MINI Clubman, Countryman
• OEM equiv: 2 357 900 (2357900)

Specialised locking tools for balance shafts found in late model BMW and BMW Mini B47 / B48 engines, and N47 engines.

• Engine codes: B47 | B48 | N47
• OEM Equiv: 2288054 | 118750 | 118790

A specialised camshaft VVT actuator wrench, which is designed to be used when replacing actuator seals, or when the camshaft needs to be removed.

The wrench latches onto the the variable valve timing (VVT) actuators to allow quick / safe removal.

• Engines: B38 | B48
• OEM Equiv: 2 360 895 (2360895)