Land Rover Crankshaft Damper Pulley Remover

2.4L TDCI | V6 Petrol
SKU: ET1013L

Automotive


Designed to remove the crankshaft damper pulley and injection pump on Land Rover Defender (07-10).

Engine Code(s)

244DT

Vehicle Make Model Series Engine Code Engine Size Year Start Year End
Land RoverDefender130244DT2.4L20072012
Land RoverDefender90244DT2.4L20072012
Land RoverDefender110244DT2.4L20072012

303-1149

Engine Code(s)

244DT

Vehicle Make Model Series Engine Code Engine Size Year Start Year End
Land RoverDefender130244DT2.4L20072012
Land RoverDefender90244DT2.4L20072012
Land RoverDefender110244DT2.4L20072012
SKU ET1013L
Barcode # 9321280347724
Brand Automotive
Vehicle Make Land Rover

12 Months


Others also bought


Tufnut 3/16-18 UNC Security Nut

Tufnut 3/16-18 UNC Security Nut

Tufnut Security Nuts are engineered for maximum tamper resistance. Case hardened steel nuts which can be installed using regular tools, and are reusable.

NEW
Promo
Oxygen Sensor Socket | 24mm Oxygen Sensor Socket | 24mm

Oxygen Sensor Socket | 24mm

A short series single hex oxygen sensor socket for the removal / installation of Oxygen / Lambda sensors. Designed with a slot in the side to allow it to be fitted over the wiring harness.

  • Applications: Jeep Grand Cherokee 3.0L V6 diesel (from 2014) | Dodge RAM 1500 3.0L V6 Diesel (from 2014)
  • Overall length - 70mm
  • 24 mm diameter | 6Pt
  • 1/2" Sq Drv (or can also be driven with a 30mm wrench


More from this category


BMW Vanos / VCT Socket | 22mm |16 Pt

BMW Vanos / VCT Socket | 22mm |16 Pt

A special 16 point impact socket for the centring valve of the camshaft timing on BMW & Mini Vanos unit and Ford VCT modules.

  • Applications: BMW B38 | B48, Ford 1.0L EcoBoost
  • 16 Point impact socket
  • 22mm dia
  • 1/2" Sq Drv

Crankshaft Front Oil Seal Tool | Ford Ranger Crankshaft Front Oil Seal Tool | Ford Ranger

Crankshaft Front Oil Seal Tool | Ford Ranger

Required tools when replacing the crank seal / removing front engine cover to replace the chain. For use on 2.0L | 2.2L | 2.4L | 3.2L TDCi / TDDi Duratorq engines fitted to Ford Transit | Ford Ranger plus Jaguar X Type X400 and Land Rover Defender.

  • First component removes diesel pump sprocket cover, and also allows oil seal to be removed / replaced.
  • Second component aligns / centralises the front camshaft chain cover before fitting the new oil seal.

Crankshaft Locking Tool

Crankshaft Locking Tool

For 4 Cyl Pumpe Duse diesel engines (1.9L | 2.0L engine with 2 & 4 valve) with arrow at 12 o'clock position with round sprockets. Also suited to FORD, SEAT & SKODA 1.9L TDi PD 3 & 4 cylinder engines.

  • OEM Equiv: T10050

Flywheel Locking Tool

Flywheel Locking Tool

SKU: ET0212

Flywheel Locking Tool

For 1.0L 3 Cyl EcoBoost GDTi engines.

  • OEM Equiv: 303-1602

Ford / JLR Oil Pump Alignment Tool

Ford / JLR Oil Pump Alignment Tool

Oil pump locking tool for 2.0L, 2.2L, 2.4L, 3.2L diesel engines and 2.3L Duratec petrol engines.

Allows the oil pump to be removed / replaced in the same position (to ensure that the oil pump is not operating with excessive side loads).

  • Mondeo | Ranger | Transit (2.0 / 2.2 / 2.4 / 3.2 TDCi / TDDi / Di Duratorq)
  • OEM Equiv: 303-705 | 303-1093 (PSA 0198H)

Ford 1.5L / 1.6L Timing Bar

Ford 1.5L / 1.6L Timing Bar

Locks camshafts in their timed position, when there is a need to remove the variable valve timing pulleys.

Use with ET0512.

  • Applications: Ford Fiesta | Focus, Volvo V40 | S60 | V60
  • Engine codes: Ford HXDA | HXJA | JQMA | PNDA | U5JA, Volvo B4164T
  • OEM Equiv: 303-1552