VAG Timing Kit

1.0MPi 3 Cyl 4V
SKU: ET0115A

Automotive


This timing kit is designed to lock the camshaft on 1.0 MPi 3 cylinder VAG engines in Volkswagen UP!, as well as Blue Motion & Ecomotive plus Green Tech engines.

This engine is a 3 cylinder twin camshaft unit, equipped with variable valve timing (VVT) on the tri lobed inlet camshaft sprocket with a conventional timing belt drive system.

  • OEM Equiv: T10340 | T10477 | T10476 | T10499 | T10494 | T10487

SKU Description OEM Equivalent Codes
ET1540

VAG Crankshaft Locking Pin

T10340

ET9916

VAG Tensioner Wrench

T10499

TT0477

Camshaft Locking Bar

T10477

TT0476

Camshaft Sprocket Locking Tool 1.0L 4V 3Cyl

T10476

TT0494

Camshaft Locking Tool 1.2L | 1.4L TSi 4 Cyl

T10494

TT0487

Camshaft Fitting Tool 1.2L | 1.4L

T10487

Engine Code(s)

Vehicle Make Model Series Engine Code Engine Size Year Start Year End
VolkswagenUp!CHYA1.0L20112015
VolkswagenUp!AACHYB1.0L20122014
VolkswagenUp!CPGA1.0L20122015
SKU ET0115A
Barcode # 9321280358973
Brand Automotive
Vehicle Make VAG
Vehicle Make Volkswagen
Vehicle Make Skoda

12 Months

Calculate Shipping



Flat Rate Shipping - $16.50
$16.50 flat rate shipping


More from this category


Camshaft / Head Rebuild Kit Camshaft / Head Rebuild Kit

Camshaft / Head Rebuild Kit

A specialised cylinder head rebuilt kit designed to allow the camshafts to be correctly fitted into the cylinder head on Porsche / VAG common rail engines.

The set contains a jig, various camshaft support fixtures, gear tooth alignment clamps and locking devices.

  • OEM Equiv: T40094 | T40095 | T40096
  • Applications: VAG 1.6L | 2.0L | 2.7L | 3.0L | 4.0L | 4.2L diesel CR engines | Porsche 3.0 TDi
  • For timing servicing on 2.7L - 4.2L engines, also refer ET1622.

VAG Balance Shaft Puller

VAG Balance Shaft Puller

This puller is designed for the removal of balance shafts fitted to 1.8L | 2.0L chain driven 4 cylinder petrol engines.

  • M8 x 1.25 internal thread

VAG Camshaft Locking Kit

VAG Camshaft Locking Kit

This kit is designed to lock the camshafts when adjusting timing on Audi A6 (>11) | A8 engines (>10).

  • Engine: 4.0L 8 Cyl 4V TFSi
  • OEM Equiv: T40264
  • Use with T40071 (TT0071) | T40269 (ET0157)

VAG Camshaft Setting Plate

VAG Camshaft Setting Plate

Setting plate for valve timing on VAG chain drive VR6 engines. Also for FORD Galaxy 2.8L (VR6)

  • Size: 175mm wide x 95mm long.

VAG Front End Support Guide Set VAG Front End Support Guide Set

VAG Front End Support Guide Set

These support guides allow the grill & radiator to be moved away from the engine without needing to disconnect the radiator and air conditioning pipes.

  • M8 x 1.25mm (17mm) x 2 guides (OEM Equiv: 3369)
  • M8x 1.25mm x 2 guides (OEM Equiv: 3411)
  • M10 x 1.5mm x 2 guides (OEM Equiv:T10093)

VAG Fuel Pump Drive Kit

VAG Fuel Pump Drive Kit

This useful kit is designed for locking the fuel pump into its timed position so that the pump drive belt can be replaced or the pump timing checked.

This kit is designed for 2.7L | 3.0L TDi engines.

  • Applications: Audi A4 (07-12), A5 (07-12), A6 (08-11) | Q5 (08-12), Q7 (07-12), VW: Phaeton (07-15), Touareg (07-11) | Porsche: Cayenne (08-16)
  • Engine codes: 2.7L CAMA, CGKA, CANA, 3.0L: CCWA, CDYA, CASA, CASD
  • OEM Equiv: T40135 | 3242 | T10320 | T40058