This chisel retainer spring is designed to secure air chisels to the air chisel / hammer during operation. This size suits all Endeavour air chisels / hammers

Built for professionals who demand performance and durability, the Black Snake Air Hammer delivers fast, efficient results across a wide range of applications. Whether you're cutting, chipping, or scraping, this tool is engineered to handle tough jobs with ease.

Delivers up to 4,000 blows per minute for rapid material removal and smooth operation.

• 5 chisels included: Tapered Punch | Flat Chisel | Spotweld Cutter | Panel Cutter | Tailpipe Cutter

An essential diagnostic tool for testing potentially faulty electro mechanical relays. This tool tests both 12V / 24V relays, with four / five pins (not late model Ford 4 pin).

Simply plug the relay into the tester - using 12V vehicle power, the relay will be cycled 10 times with the tester applying a signal to the relay coil while checking the function of the internal contacts. The tester applies load to the internal contacts to detect excessive resistance.

• Quickly test 3 common types of electro mechanical relays
• Test relay coil resistance / relay contacts / cyclic testing
• Relay coil resistance: 20 - 500 Ohms
• Test voltage for coil: 9V
• Contact resistance threshold: 200 milliohms

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system. This adaptor suits Ford / Mazda vehicles & Tesla model 3/Y.

This adaptor has a double o-ring design that seals to a depth of 14mm.

• Suits Ford / Mazda vehicles, as well as Tesla Model 3/Y (2017- ).
• Nitto style connector fitting
• Right angle connector
• Inner cap 36mm dia | Inner point to point 50mm (excluding lugs)
• 3 lug design
• Tesla OEM code: 1080578 00 C

Quickly find leaks in both engine and turbo systems. Built in air compressor / light weight / powered from 12V battery.

• Pressure range: 0.5 - 17 PSI (adjustable)
• Use with supplied fluid (50ml), or optional dyes
• 12 month warranty
• Built in air compressor!
• Includes accessory kit!

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Tesla S / X vehicles.

• Applications: Holden Colorado (2017-) | Ford Transit (2019-) | Mazda 3 (2015-) | Tesla S (2012-) / X (2015-)
• Nitto style connector fitting
• 36mm dia
• 3 Lug bayonet fitting
• OEM Code: 1086619 00 B

An essential safety tool. Locks onto gas struts during vehicle service, to enable the struts to be fixed in an extended position. Universal application for all gas struts on boots, bonnets, hatch backs etc, as the clamp simply locks onto the strut's shaft.

• Aluminium body and brass tip to prevent damage to the lift support
• Magnet to hold the tool in place while securing the clamp
• For up to 13mm struts

Straight type hammer with chisel head for flux removal. Replacement chisels available.

A trade quality needle scaler ideal for removing coatings, corrosion etc. Sturdy and simple design for extra durability. Adjustable front tube extends needle life. Piston and cylinder are heat treated for better durability.

• 4,600 blow / minute
• 15 CFM average air consumption

Built for professionals who demand performance and durability, the Black Snake Air Hammer delivers fast, efficient results across a wide range of applications. Whether you're cutting, chipping, or scraping, this tool is engineered to handle tough jobs with ease.

Delivers up to 4,000 blows per minute for rapid material removal and smooth operation.

• 5 chisels included: Tapered Punch | Flat Chisel | Spotweld Cutter | Panel Cutter | Tailpipe Cutter

Industrial quality needle scaler. Able to deliver up to 5,000 blows / minutes. Uses 12x standard 3mm x 180mm needles.

• 5,000 BPM
• Needles: 3mm x 180mm (12x)
• Avg Air Consumption: 1.7 CFM
• Weight: 1.3kg

Converts any standard air hammer into a needle scaler. Simply remove spring retainer and screw on.

• Includes 19 air needles
• Needle size: 3mm x 180mm