The ET2031B Universal Line Kit is a versatile, multi function diagnostic set designed for fast, secure connection to vehicle wiring during general engine testing and circuit evaluation. It enables quick probing, signal access, and component activation across a wide range of automotive systems, making it an essential tool for efficient fault finding and reliable electrical diagnostics.

This kit comes with a bonus multimeter - offering a comprehensive diagnostic solution.

• Dual-Function LED Testers - these two-way LED circuit testers allow for quick identification of power and ground signals, making fault-finding faster and more intuitive.
• Black & Red Multimeter Connector Leads - ensuring reliable connectivity for a wide range of diagnostic tasks.
• Round Terminal Adapters (Male & Female) to Banana Plug - male and female round terminal adapters connect seamlessly to standard banana plugs; ideal for interfacing with OEM wiring and connectors.
• Flat Blade Terminal Adapters (Male & Female) to Banana Plug - Includes flat blade terminal adapters for compatibility with common automotive spade connectors, improving versatility during testing.
• Variable Resistors with Banana Terminals - adjustable resistors allow technicians to simulate loads, test sensor circuits, and diagnose voltage dependent faults with confidence.
• Needle Style Piercing Probes - designed for clean, precise back-probing without damaging insulation; perfect for modern fine gauge wiring.
• Heavy Duty Alligator Clips - these rugged clips provide strong, secure connections to battery posts, chassis grounds, or test points, ensuring stable readings during diagnostic work.

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 330 x 270 x 150mm
• 40kHz frequency
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

A workshop quality touch control ultrasonic cleaner. This larger size is ideal for cleaning manifolds as well as smaller parts. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 500 x 300 x 200mm
• Dual 33kHz (coarse) / 40kHz (intensive) frequency
• 600W ultrasonic power / 500W heating power
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer (1-99 minutes working time)
• Digital temperature setting (0-80 degrees C range)

This pen style tool tests the percentage of water in brake fluid, and tests all essential profiles for modern brake fluids. Please refer to the DOWNLOAD tab for a detailed instruction sheet.

• Colour coded LEDs show water level
• DOT 3 | DOT 4 | DOT 5.1
• Not suitable for silicone based DOT 5.0
• Rechargeable Li-ion battery

Industry leading live graphing on colour screen.

100kPa pressure range, with adaptor kit included.

Use with scan tool live data to compare with actual pressure readings.

An essential workshop tool.

• Inlet manifold pressure
• DPF pressure gradient
• Turbo output pressure

Straight type hammer with chisel head for flux removal. Replacement chisels available.

A trade quality needle scaler ideal for removing coatings, corrosion etc. Sturdy and simple design for extra durability. Adjustable front tube extends needle life. Piston and cylinder are heat treated for better durability.

• 4,600 blow / minute
• 15 CFM average air consumption

Industrial quality needle scaler. Able to deliver up to 5,000 blows / minutes. Uses 12x standard 3mm x 180mm needles.

• 5,000 BPM
• Needles: 3mm x 180mm (12x)
• Avg Air Consumption: 1.7 CFM
• Weight: 1.3kg

Converts any standard air hammer into a needle scaler. Simply remove spring retainer and screw on.

• Includes 19 air needles
• Needle size: 3mm x 180mm

Well designed kit containing an Endeavour Air Chisel / Hammer. Pistol grip air hammer suits 0.401" shank chisels.

• Chisel Shank: 0.401"
• Stroke Length: 10mm
• Free blow speed: 2,600 SPM
• Avg air cons: 3.0CFM
• Weight: 1.60kg
• Noise level: 104dBA
• Needles: 3mm x 180mm (12x)