Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.

• Potentiometer (variable resister) (1x)
• Signal tester / LED stroboscope (2x)
• Piercing probes (green / yellow)
• Test probe extension (2x)
• SRS (airbag) connector (1x)
• Crocodile clip adaptors (2x)
• Needle probes (4x)
• DMM test leads (2x)
• Banana plug extensions (4x)
• Flat terminals (8x)

Measures Visual Light Transmission (VLT) through windows treated with aftermarket window tint film. Each probe has a magnet that will hold against the glass for measurement.

• Two piece design allows users to check all windows on vehicle, including all fixed windows.
• Essential testing tool for vehicle inspections.
• 4x AAA batteries included.

This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required

A professional adaptor kit for use with our ETWH505H pressure blake bleeder kit. This adaptor kit contains a wide range of vehicle specific adaptors, as well as universal style adaptors.

• Nitto style connectors
• 12 pce kit

This spill free funnel allows for refilling coolant while eliminating trapped air pockets. The kit includes adaptors for most vehicles, and extension / 45 degree elbows for those hard to reach radiator caps.

• Threaded cap / adaptors for Ford surge tanks / Holden threaded style radiators.

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 330 x 270 x 150mm
• 40kHz frequency
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

Easy to read 2-1/2" diameter gauge features colour coded quadruple calibrations. 6" heavy duty stem with universal rubber cone adaptor fits all plug holes. Convenient pressure holding side release valve. Provides an accurate reading on high performance engines.

• 0-300 PSI | 21kg/cm | 21 Bar | 2100kPA
• 13" durable rubber hose with 14mm | 18mm adaptors.

A compact kit designed to diagnose compression related issues on direct & indirect injection diesel engines. Suitable for most commercial / marine / industrial engines, the kit contains a pressure gauge (0-1000 PSI), extensions, glow plug and universal adaptors.

The kit is designed with a snap coupling connection system and pressure relief valve for easy / convenient operation.

• End adaptors: Ext dia 20.5mm, Length: 30mm | EXT. DIAMETER: 23.6, LENGTH(MM): 32 | EXT. DIAMETER: 23.6, LENGTH(MM): 41
• Clamp plates: LENGTH(MM): 63.5, WIDTH: 25MM, HOLE DIA.:17MM | LENGTH(MM): 76.2, WIDTH: 15MM, HOLE DIA.:17MM

Comprehensive kit suits a wide range of small passenger vehicles through light trucks.

Includes 4 injector adapters and a universal injector adapter kit (contained in small box). The clamp-on adapters offer more applications on truck, van, bus, marine, and agricultural machinery.

• Plus gauge assembly, glow plug test adaptors and universal "clamp on" adaptors injector pullers.

Covers wide of modern engines including HDi / TDCi / Pumpe Duse. Includes clamp on injectors, 0-50 Bar gauge, straight / right angled quick connect fittings, and extensive range of glow plug / injector adaptors. Additional gauge for incoming pressure. Suits most car / truck / agricultural / marine diesel engines.

• Spark plug sizes: 10 | 12 | 14 | 18mm
• Injectors: M20 | M22 | M24 & Ford Stanadyne injector clamp on injector

This petrol engine compression kit provides a fast way for testing cylinder compression pressure on engines with deep, recessed spark plugs and / or difficult access.

A special air hold valve allows for easy resetting of the gauge, and tapered cone adaptors allow for multi size applications.

• 58mm dia gauge (10-300 psi) includes pressure release valve
• Adaptors - M10x1.0 | M12x 1.25 | M14x1.25
• Universal adaptors - angled / straight