An essential diagnostic tool for testing potentially faulty electro mechanical relays. This tool tests both 12V / 24V relays, with four / five pins (not late model Ford 4 pin).

Simply plug the relay into the tester - using 12V vehicle power, the relay will be cycled 10 times with the tester applying a signal to the relay coil while checking the function of the internal contacts. The tester applies load to the internal contacts to detect excessive resistance.

• Quickly test 3 common types of electro mechanical relays
• Test relay coil resistance / relay contacts / cyclic testing
• Relay coil resistance: 20 - 500 Ohms
• Test voltage for coil: 9V
• Contact resistance threshold: 200 milliohms

An extra long prybar with tang thru design. Ideal for heavy duty automotive / industrial prying work. Features a comfortable rubber handle, with a hardened shaft.

• 940mm overall length
• Bent tip

Heavy vehicles require higher capacity smoke machines. The new SmokeMan HD delivers up to 120 PSI max pressure. Test more than just engines. Check for leaks on small water tanks etc...

However, please note that smoke (mineral oil and / or UV dyes) must not be injected into braking systems.

• Both flow and pressure control
• Up to 120 PSI max pressure (compressed air required)
• Heavy vehicle adaptor set included
• Dual gauges - Test and System Pressure
• 12 month warranty

Handy guide for checking bolt / stud / screw's - pitch, length and diameter. Suits 18 common metric & imperial sizes

• Metric sizes: M10x1.5 | M12x1.75 | M12x1.5 | M12x1.25 | M13x1.25 | M13x1.5 | M14x1.25 | M14x1.5 | M15x1.5 | M16x1.5 | M17x1.5 | M18x1.5 | M20x1.5 | M22x1.5 | M24x1.5 | M26x1.5
• 1/2"-20 | 3/4"-16
• Plus 5cm ruler, and flange diameter gauge (10 - 50mm)

• 30kg load capacity
• 420 x 260 x 300mm

This hydraulic pump is designed to be used with many hydraulic ram type assembly kits such as ET1129, ET1129D, ET1129F, ET1536A, ET1544A, ET1389B, ET1129E etc.

• 3/8" adaptor
• 800kg output
• 700 Bar maximum pressure