Sonsbeek non sealing type tyre chucks are designed to be used when the chuck is to be connected to a tyre inflator / gauged airline.

Our non sealing type chucks will not seal the chuck opening when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek non sealing type chucks are available in a range of different configurations - all designed to suit Schrader tyre valves. Where the chuck is to be connected directly to an airline, a sealing type chuck should be used.

• Clip On tyre chuck
• 1/4" BSP female inlet
• Non sealing type

Measures angle of rotation following pre-torque adjustment. 0-360¡ measurement range in 2¡ increments. Rotate housing to zero gauge.

• 1/2" Sq Drv

Handy guide for checking bolt / stud / screw's - pitch, length and diameter. Suits 18 common metric & imperial sizes

• Metric sizes: M10x1.5 | M12x1.75 | M12x1.5 | M12x1.25 | M13x1.25 | M13x1.5 | M14x1.25 | M14x1.5 | M15x1.5 | M16x1.5 | M17x1.5 | M18x1.5 | M20x1.5 | M22x1.5 | M24x1.5 | M26x1.5
• 1/2"-20 | 3/4"-16
• Plus 5cm ruler, and flange diameter gauge (10 - 50mm)

This hydraulic pump is designed to be used with many hydraulic ram type assembly kits such as ET1129, ET1129D, ET1129F, ET1536A, ET1544A, ET1389B, ET1129E etc.

• 3/8" adaptor
• 800kg output
• 700 Bar maximum pressure