An optional nozzle for use with the Air Boy range of thrust guns. This nozzle has holes on the side, providing high volumes of airflow at 90 degrees to the pipe.

This nozzle is ideal for blowing out filters. This nozzle is provided with the 124140009 thrust gun, and is available separately for the other thrust guns.

The Air Boy 124140112 Blow Gun is a high-performance compressed air tool designed for cleaning, drying, and blow-off applications. Featuring a straight 300mm pipe, this blow gun provides extended reach, making it ideal for hard-to-access areas in workshops, garages, and industrial settings.

Built with impact-resistant acetal plastic, the ergonomic handle and large trigger ensure precise airflow control for efficient operation. With a maximum working pressure of 16 bar, this blow gun delivers powerful air output while maintaining low noise levels for user comfort.

Made in Denmark quality. Lifetime guarantee on the valve mechanism.

• Pipe length: 300mm
• Pipe dia: 8mm
• Inlet size: 1/4" BSP

Air Boy thrust guns provide a very high air flow, and offer a safe solution, as the nozzle is unblockable. The thrust nozzle increases airflow by 100% due to the venturi principle.

Air Boy thrust guns have a wide range of cleaning applications in commercial vehicles, trade and industry.

• Max 12 bar pressure
• 600 litres / min @ 8 Bar
• 98.2 dB @ 8 Bar

The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

An optional nozzle for use with the Air Boy range of thrust guns. This nozzle has holes on the side, providing high volumes of airflow at 90 degrees to the pipe.

This nozzle is ideal for blowing out filters. This nozzle is provided with the 124140009 thrust gun, and is available separately for the other thrust guns.

A replacement THRUST nozzle for the Air Boy range of high airlflow THRUST blow guns. This nozzle increases the airflow by 100% due to the venturi principle. The nozzle is also unblockable, as the airflow can escape from the size if the tip becomes blocked.

• 52mm overall length