An optional nozzle for use with the Air Boy range of thrust guns. This nozzle has holes on the side, providing high volumes of airflow at 90 degrees to the pipe.

This nozzle is ideal for blowing out filters. This nozzle is provided with the 124140009 thrust gun, and is available separately for other thrust guns.

• 90 degree nozzle

A replacement THRUST nozzle for the Air Boy range of high airlflow THRUST blow guns. This nozzle increases the airflow by 100% due to the venturi principle. The nozzle is also unblockable, as the airflow can escape from the size if the tip becomes blocked.

• 52mm overall length

The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

The Air Boy Cleaning gun is a powerful and efficient cleaning gun suitable for most kinds of cleaning agents. Air Boy Cleaning gun is ideal for degreasing, cleaning and detergent coating purposes, even where aggressive chemicals are used.

The nozzle is easy to adjust as to spreading of the liquid.

The Air Boy Cleaning gun is designed to assist you in the best possible way on a daily basis. The Air Boy Cleaning gun is user-friendly and easy to operate - the liquid flow is infinitely adjustable and easily regulated using the trigger. We use compressed air to ease the activation of the handle making it easy, accurate and simple to operate. All other materials are impact and corrosion resistant.

• Effective degreasing, washing and shampooing.
• Infinitely adjustable liquid flow via the trigger
• 260mm metal nozzle
• Made in Denmark
• Operating pressure: 6 - 12 Bar (87 - 174 PSI)
• Max 100 l/min at 8 bar
• 1.5L cannister

The Air Boy 90 degree nozzle is now available in a new pushfit version. The function of the nozzle remains unchanged, but the pushfit connector makes it possible to remove the nozzle from the tip. The 90 degree nozzle is perfecct for cleaning out cylindrical filters etc.

The pushfit connector actively locks onto the blow gun pipe, and will not come off until the collar is lifted. Suits all 8mm dia Air Boy blow guns.

• Ideal for blowing out filters
• Works with all Air Boy 8mm dia blow guns
• Made in Denmark

Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. 35mm dia is suitable for flushing larger hoses.

• Suitable for all Air Boy blow (and other) guns with an 8mm dia pipe.
• Actively locks onto the blow gun pipe.
• Non-marring rubber surface protects against scratching delicate surfaces.

The Air Boy thrust gun is ideal for cleaning tasks where extremely high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

The standard nozzle supplied with the gun simply screws on / is replaceable. A 90 degree nozzle is available for purchase separately.

• 1/4" BSP inlet
• 300mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

A replacement THRUST nozzle for the Air Boy range of high airlflow THRUST blow guns. This nozzle increases the airflow by 100% due to the venturi principle. The nozzle is also unblockable, as the airflow can escape from the size if the tip becomes blocked.

• 52mm overall length

An optional nozzle for use with the Air Boy range of thrust guns. This nozzle has holes on the side, providing high volumes of airflow at 90 degrees to the pipe.

This nozzle is ideal for blowing out filters. This nozzle is provided with the 124140009 thrust gun, and is available separately for other thrust guns.

• 90 degree nozzle