A specialised timing tool kit when replacing the timing belt on Ford Zetec engines. This kit suits a wide range of popular Ford / Mazda vehicles.

• Engine: ZETEC (1998 onwards) | Twin Cam 16V petrol engines
• Applications: Cougar | Escape | Focus | Mondeo
• Timing pin also suits Mazda 121 (1.25L petrol)

For new high efficiency 4 cylinder petrol turbocharged engines with variable valve timing fitted to Ford / Volvo vehicles.

Also refer ET5412 camshaft setting bar.

Applications: Ford Fiesta WZ | Focus LW | Kuga TF | B-Max | C-Max, Volvo S60 | V60

OEM Equivalents & Engine Codes:

• TT1054: Ford 303-1054, VAG T10115, VAG T03006
• TT1550: Ford 303-1550, Volvo 999 7431
• TT0748: Audi 303-748, Volvo 999 7406, Mazda 21-259
• TT1097: Ford 303-1097, Volvo 999 7429
• JTJA | JQMA | M8MA | M9MA | JTMA | B4164T | PNDA

An essential kit for locking camshafts / crankshafts / timing covers on Ford / Volvo. Plus Mazda crankshaft pulley holder

This kit suits those engines where one camshaft is longer than the other one.

This modest little set is designed for the 2.0L / 2.2L DOHC common rail diesel engines in Ford, Land Rover, Peugeot & Volvo vehicles.

It allows the camshaft pulley to be locked using the timing pin while securing the flywheel / ring gear with the locking pin & plate. The cam belt transmits drive from crankshaft to camshaft then from one camshaft to the other by chain located in the cylinder head.

• OEM Equiv: 303-393 | 303-393-01 | 303-1059 | 303-1277

This kit locks the camshaft during timing belt replacement over the complete range of Ford Duratec engines in both belt & chain drive variants.

• Applications: Wide range of Ford | Mazda | Volvo vehicles with 1.25L | 1.4L | 1.6L 16v Ti-VCT engines plus 1.8L | 2.0L | 2.3L 16v engines.

Specialised kit for holding camshafts in the correct position while installing the front crankshaft oil seal, and while setting the tappets.

Designed for use with 2.5L 20V DOHC petrol engines fitted to Ford Focus / Mondeo (MA / MB), and various Volvo vehicles.

• OEM Equiv: 303-1180 | 303-1183 (999 5765)
• Engine codes: B5254 | HUBA | HYDA

Counter holds crankshaft pulley while servicing pulley retaining bolt. Also suits certain Volvo vehicles.

• OEM Equiv: 205-072 (999 7128 | 49 B011 105)
• Applications: Ford Fiesta | Mondeo | Transit, Volvo C30 | S40 | V50

Disconnects stubborn heater hose fittings on 2.0L EcoBoost engines in Focus (12-16) | Escape | Kuga (13-16). Fittings are close to firewall behind the engine, and hard to remove without this tool.

• Made from heavy duty nylon

Comprehensive kit for 2.0L | 2.3L SCTI EcoBoost / Ti-VCT direct injection petrol engines, with variable valve timing.

• Applications: Ford Focus (LW | LZ) | Mondeo (MC) | Mustang 2.3 GTDi (FM / FN)
• Engine codes: MGDA | R9DA | TNBA | YVDB | YVPT

A specialised tool for removing / installing dual clutch transmissions on Ford | Volvo engines.

• OEM Equiv: Ford 308-763 | Volvo 9997435

Essential new tool for removal of BM5G-9F593-BA / CM5G-9F593-BA injector nozzles on Ford EcoBoost GDi engines.

The kit is designed for engines up to 2.0L. The split collet (with its slim design) fits down over the injector. Turn to securely grip the injector, then extract with the slide hammer.

• OEM Equiv: 310-206 (9997410)

This locking strap suits VAG 2.4L | 2.8L | 2.7L Turbo 4 Cam 30V engines (99 - 05). Size: 685mm O/A x 6mm & 8mm pins each side x 54mm distance x 40mm hole dia. USE with ET1105-4, ET1657, ET1205B & ET1297.

• Engine codes: ACK | AGA | APR | BBG
• OEM Equiv: 3391

A specialised timing kit for Volvo D4204T engines. This kit comprises the ET1574 kit, plus an additional camshaft / crankshaft locking pin not included in that kit.

• Engine code: D4204T
• OEM Equiv: 999 7119 | 999 7120 | 999 7121 | 999 7122