Used to lock the flywheel in place on a range of late model engines, as well as releasing / tightening down bolts on the vibration damper.

Use in conjunction with ET1517A

• Applications: M47T2 | M47TU | M57T2 | M57TU | M67 | N45 | N45T | N46 | N46T | N51 | N52 | N53 | N54 | W17
• OEM Equiv: 11 8 180 | 11 8 182 | 11 8 183

A specialised kit for replacing O-ring seals on the bottom of petrol injectors in a range of BMW engines.

This kit includes a small slide hammer which screws onto the top of the injector.

• Applications: N13 | N14 | N18 | N20 | N43 | N54 | N55 | N63 | N73 | S55 | S63 | B38 | B48
• Guide cones: 7.45mm / 7.8mm
• Seating sleeves: 8.9mm (7.8mm) | 9.3mm (8.0mm) | 9.5mm (8.1mm)
• Seating tool: 9.2mm (9.05mm)
• OEM Equiv: 130280 | 130281 | 130282 | 130283 | 130190 | 130192 | 130193 | 130194

This kit comprises fitting aids to correctly fit the Teflon seal onto a BMW fuel injector prior to refitting the fuel injector into the cylinder head.

The Teflon seal material is designed to expand once installed into the injector bore to enable an effective seal. There are two methods of shrinking the Teflon sea, depending up the engine code / type of injector fitted.

• Applications: N13 | N14 | N18 | N20 | N43 | N55 | N63 | N74 | S55 | S63 | B38 | B48
• OEM Equiv: 130190 | 130280

A specialised tool for removing stuck petrol injectors on direct injection V8 BMW engines.

• Applications: 5 Series | 6 Series | 7 Series | X5 and X6 vehicles
• Engine codes: N43 | N63 (08-12) / S63
• OEM Equiv: 130 300

This timing kit is designed for 1.6L | 2.0L chain driven engines to set the camshaft timing during cam chain removal or replacement (or check / adjust timing). The kit contains the camshaft locking tool; VANOS sensor alignment bar; balancer shaft locking plate; timing chain tensioner retractor & locking pins plus the flywheel locking pin.

• Engine codes: N42B16 | N43B20

A specialised kit to facilitate timing chain replacement in BMW engines, offering major time savings.

A chain guide tool facilitates old chain withdrawal and simultaneous new chain insertion.

• Engine codes: N43 | N45 | N46 | N47
• Applications: E81 E87 E87 LCI E88 E82 F20 F20 LCI F21 F21 LCI E46 E90 E90 LCI E91 E91 LCI E92 E92 LCI E93 E93 LCI F30 F30 LCI F31 F35 F35 LCI E60 LCI E61 LCI F07 GT F07 GT LCI F10 F10 LCI F11 F11 LCI F06 GC F06 GC LCI F12 F12 LCI F13 F13 LCI X1 (E84) X3 (E83) X3 (E83LCI) X3 (F25) X4 (F26) X5 (E70LCI) X5 (F15) X6 (E71) X6 (F16) Z4 (E85) Z4 (E89) R56 R56 LCI R55 R55 LCI R57 R57 LCI R58 R59 R60 R61
• OEM Equiv: 83 30 2 354 985 (83302354985 )

Special universal joint socket for spark plugs that are installed at an angle. This includes BMW N43 engines (1 series: E81 | E87, 3 series: E90). The double hex (12 Point) profile allows for use with single / double hex spark plugs.

• 14mm diameter
• Rubber insert to grip spark plug
• 12 point double hex profile
• 92mm length
• 3/8" Sq Drv