Drive Flange Locking Kit

SKU: ET9103

Automotive


This specialised tool locks the drive flange to prevent rotation when servicing the inner drive shaft mounting bolts / hub nuts.

The specially designed plastic wheels wedge between the brake caliper and the drive flange, using the vehicle's own wheel bolts or nuts.

  • Allows easy removal of driveshaft / hub fixings.

  • One man operation.

SKU ET9103
Barcode # 9321280408968
Brand Automotive

12 Months


More from this category


Adjustable Wheel Bearing Lock Nut Wrench

Adjustable Wheel Bearing Lock Nut Wrench

Adjustable jaws fit all hexagon (49 - 135mm) & octagon (49 - 143mm) wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.

  • 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
  • 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
  • Pin diameters: 1/4" | 5/16" | 3/8"

Drive Shaft Wheel Bearing Supports Drive Shaft Wheel Bearing Supports

Drive Shaft Wheel Bearing Supports

Universal dummy drive shaft wheel bearing supports are easy to install, and allow most light vehicles to be placed back on their wheels, and moved without their drive shafts. For instance, when the gearbox / engine are removed, and the vehicle needs to be moved.

To install simply insert in place of the drive shaft through the wheel drive flange. Holds the bearing and flange together to prevent damage.

Do not tow vehicle on public roads using these supports. Beware modern ABS sensors.

Ford / Volvo 78mm GEN2 Wheel Bearing Removal Kit

Ford / Volvo 78mm GEN2 Wheel Bearing Removal Kit

A specialised kit for servicing Gen II wheel hubs / bearings on Ford | Volvo vehicles with 78mm diameter front wheel bearings. These tools ensure that the insertion loads are taken only on the outer race of the bearing. Gen II wheel bearings are a wheel bearing / drive flange that cannot be separated.

Always adequately lubricate threaded force screws and thrust bearings.

  • 78mm dia front bearings
  • Applications: Ford: Focus II (LS / LT) | C-Max, Mazda: 3 (BK / BL), Volvo: C30 | C70 | S40 | V50

Ford Front Wheel Bearing Removal Kit

Ford Front Wheel Bearing Removal Kit

An essential time saving service kit for working on Transit (>06) wheel bearings and brakes on the front axle. Permits correct dismantling of the wheel bearing, with hub and brake disc.

Ford Transits (from 2006) have a design whereby the brake disc is positioned behind the wheel hub. Accordingly every brake disc changes requires the wheel bearing housing with wheel hub to be first removed.

  • Removal of wheel bearing housing with hub
  • Changing of brake disc
  • Changing of wheel bearings
  • Removal of the bearing inner race from hub
Ford GEN2 Wheel Bearing Removal Kit

Ford GEN2 Wheel Bearing Removal Kit

A specialised kit for servicing Gen II wheel hubs / bearings on Ford vehicles with 82mm diameter front wheel bearings. These tools ensure that the insertion loads are taken only on the outer race of the bearing. Gen II wheel bearings are a wheel bearing / drive flange that cannot be separated.

Always adequately lubricate threaded force screws and thrust bearings.

  • 82mm diameter

Ford Lock Nut Socket Ford Lock Nut Socket

Ford Lock Nut Socket

Special socket for adjusting castellated axle lock nuts on Transit vehicles (80 | 100 | 115 | 120) with RWD type 34 axles.

  • 63mm OD | 53mm ID
  • 4 Pin design
  • 1/2" Sq Drv